diplomsko delo
Aljaž Trpin (Avtor), Vito Logar (Mentor)

Povzetek

V diplomskem delu sem opisal izvedbo in testiranje testne naprave za umerjanje motorskih zaščitnih stikal. Do izdelave testne naprave je prišlo zaradi premajhne zmožnosti dosedanjega stroja. Pred zaključkom izdelave stikala je potrebno vsako stikalo, ki je izdelano na končno umerjanje, preveriti pravilno delovanje, oz. pregledati, ali je s samim stikalom kaj narobe. Pri samem testu je pomembno, da je tok čim bolj konstanten in nima prevelikih nihanj pri vklopu in spremembi toka. V prvem delu naloge sem opisal posamezne uporabljene komponente in programe, s katerimi sem programiral in pregledoval različne komponente. Opisane so tudi nekatere prednosti posameznih komponent. V drugem delu sem opisal postopek izdelave posameznih delov in končno testiranje same naprave. Pri samem testiranju sem uporabljal različne metode merjenja in preverjanja pravilnega delovanja naprave.

Ključne besede

frekvenčni regulatorji;zaščitna stikala;tokovniki;testiranje;visokošolski strokovni študij;Aplikativna elektrotehnika;diplomske naloge;

Podatki

Jezik: Slovenski jezik
Leto izida:
Tipologija: 2.11 - Diplomsko delo
Organizacija: UL FE - Fakulteta za elektrotehniko
Založnik: [A. Trpin]
UDK: 621.3(043.2)
COBISS: 133671171 Povezava se bo odprla v novem oknu
Št. ogledov: 54
Št. prenosov: 20
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Angleški jezik
Sekundarni naslov: Monitoring device for testing of the motor-protection switches
Sekundarni povzetek: In my thesis, I described the implementation and testing of test devices for calibrating motor protection switches. The production of the test device was initiated due to insufficient capacity of the existing machine. After all, every switch that is manufactured, must be checked for proper operation and inspected if there are any flaws in the switch, before the end of the switch manufacturing process. In the test itself, it is important that the current during the test is as constant as possible and does not have excessive fluctuations when switching on and changing the current. In the first part of the thesis, I described all the components used in the program, with which I programmed and checked the various components. Some advantages of individual components are also described. In the second part, I described the manufacturing process of individual parts and the final testing of the same devices. During the actual testing, I used various methods of measuring and checking the correct operation of the device itself.
Sekundarne ključne besede: frequency controller;protection switch;current transformer;testing;
Vrsta dela (COBISS): Diplomsko delo/naloga
Študijski program: 1000315
Konec prepovedi (OpenAIRE): 1970-01-01
Komentar na gradivo: Univ. v Ljubljani, Fak. za elektrotehniko
Strani: VI, 36 str.
ID: 17389070