Parametric study of an active-passive system for cooling application in buildings improved with free cooling for enhanced solidification

Eva Zavrl (Avtor), Urban Tomc (Avtor), Mohamed El Mankibi (Avtor), Mateja Dovjak (Avtor), Uroš Stritih (Avtor)

Povzetek

The present study introduces an active-passive system (APS) with phase change material (PCM) integrated into the substructure of the internal walls and ceiling for cooling. To ensure sufficient cooling effect of the system during the daytime cycle, the system must solidify completely during the nighttime cycle and operation costs comparable to the ones of conventional cooling systems. An air gap was formed between the primary wall and ceiling and the PCM substructure and ventilated with the cool outdoor air during the nighttime cycle. A parametric study was performed using ANSYS Fluent followed by the energy performance and operation cost analysis. Different inlet air temperature scenarios (15-20°C) were tested (suitable PCM thermal characteristics). The required solidification-time of PCM was determined. The model is validated against the experimental tests. The results show that with the current configuration, the PCM plates can be sufficiently solidified at supply air temperatures of 17°C and below. If the system is ventilated with inlet air temperatures above 17°C, additional cooling options must be considered. The study also determines the energy performance of the system under the chosen conditions and compares its feasibility to the conventional cooling systems (energy efficiency class A+++ and G air-conditioning device).

Ključne besede

nočno prezračevanje;fazno spremenljivi materiali;zalogovnik toplote;prezračevana zračna rega;PCM integrirani v stavbne elemente;računalniška dinamika tekočin;night ventilation;phase change material;thermal energy storage;ventilated air gap;PCM integrated building elements;computational fluid dynamics;

Podatki

Jezik:	Angleški jezik
Leto izida:	2023
Tipologija:	1.01 - Izvirni znanstveni članek
Organizacija:	UL FS - Fakulteta za strojništvo
UDK:	697:621.5
COBISS:	166103555
ISSN:	2210-6715
Št. ogledov:	119
Št. prenosov:	20
Ocena:	0 (0 glasov)
Metapodatki:

Ostali podatki

Sekundarni jezik:	Slovenski jezik
Sekundarne ključne besede:	nočno prezračevanje;fazno spremenljivi materiali;zalogovnik toplote;prezračevana zračna reža;PCM integrirani v stavbne elemente;računalniška dinamika tekočin;
Vrsta dela (COBISS):	Članek v reviji
Strani:	str. 1-18
Zvezek:	ǂVol. ǂ99
Čas izdaje:	Dec. 2023
DOI:	10.1016/j.scs.2023.104960
ID:	21493020