Blaž Hanželič (Avtor), Jernej Kralj (Avtor), Tonica Bončina (Avtor), Branko Nečemer (Avtor), Janez Kramberger (Avtor), Roman Satošek (Avtor), Srečko Glodež (Avtor)

Povzetek

The plate heat exchanger (PHE) is a component that provides heat to be transferred from hot water to domestic cold water without mixing them with high efficiency. Over the lifetime of the PHE, cyclic pressures act on the brazing points and the plates, and this may lead to fatigue failure. The fatigue behaviour of the PHE, designed using copper-brazed 316L stainless steel, was investigated in this study. First, the fatigue tests under the load ratio R = 0.1 were performed on the Vibrophore 100 testing machine to obtain the S-N curve of the analysed brazed joint. Based on the obtained experimental results, an appropriate material model of the analysed brazed joint has been created, which was validated with numerical calculation in the framework of a program code Ansys. A validated material model was then used for the subsequent numerical analysis of PHE. In order to carry out a numerical calculation using the finite element method (FEM), a three-dimensional model of the heat exchanger was created based on the previous scanning of PHE-geometry. Thereafter, the geometry was parameterised, which allowed us to perform parametric simulations (monitoring different responses depending on the input geometry). Numerical simulations were carried out in the framework of the Ansys 2023-R1 software, whereby the obtained results were analysed, and the responses were appropriately characterised according to previously determined load cases.

Ključne besede

lotni spoj;utrujanje;eksperimentalno testiranje;računalniške analize;toplotni izmenjevalec;brazed joint;fatigue;experimental testing;computational analyses;heat exchanger;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: UM FS - Fakulteta za strojništvo
Založnik: MDPI
UDK: 620.17:621.791.3
COBISS: 182982659 Povezava se bo odprla v novem oknu
ISSN: 1996-1944
Št. ogledov: 35
Št. prenosov: 5
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Slovenski jezik
Sekundarne ključne besede: lotni spoj;utrujanje;eksperimentalno testiranje;računalniške analize;toplotni izmenjevalec;
Vrsta dela (COBISS): Članek v reviji
Strani: 13 str.
Letnik: ǂVol. ǂ17
Zvezek: ǂiss. ǂ2, [article no.] 479
Čas izdaje: Jan. 2024
DOI: 10.3390/ma17020479
ID: 22766787