Elucidating the effects of surface wettability on boiling heat transfer using hydrophilic and hydrophobic surfaces with laser-etched microchannels
Povzetek
This study explores the nuanced interplay between surface wettability and morphology in nucleate boiling heat transfer. Surfaces with identical microstructures but varying wettability are created on copper substrates using laser texturing and a hydrophobic agent. The spacing between laser-etched microchannels is adjusted to achieve different contact angles and percentages of laser-textured areas. Boiling performance is assessed with variations in channel spacing and surface coverage, revealing significant differences between hydrophilic and hydrophobic surfaces. The critical heat flux (CHF) enhancement mechanisms are identified, emphasizing either enhanced liquid replenishment or separate boiling and liquid-supply regions. A critical laser line spacing of 100 μm is determined, where hydrophobic and hydrophilic variants exhibit similar CHF. Interestingly, hydrophilic surfaces show a weak correlation between the heat transfer coefficient (HTC) and contact angle, while hydrophobic surfaces demonstrate a strong correlation. This separation of surface morphology and wettability confirms that lower wettability promotes early nucleate boiling and high HTC, whereas hydrophilic variants contribute to enhanced CHF with lower HTC. These distinctions are most prominent at high coverage with laser-textured areas and diminish as coverage decreases. The findings provide valuable insights into optimizing surface properties for efficient boiling heat transfer applications.
Ključne besede
vrenje;koeficient toplotne prestopnosti;kritična gostota toplotnega toka;lasersko teksturiranje;omočljivost;boiling;heat transfer coefficient;critical heat flux;laser texturing;wettability;
Podatki
| Jezik: | Angleški jezik |
|---|---|
| Leto izida: | 2024 |
| Tipologija: | 1.01 - Izvirni znanstveni članek |
| Organizacija: | UL FS - Fakulteta za strojništvo |
| UDK: | 536.24:66.046.7 |
| COBISS: |
192382467
|
| ISSN: | 2214-157X |
| Št. ogledov: | 11 |
| Št. prenosov: | 3 |
| Ocena: | 0 (0 glasov) |
| Metapodatki: |
|
Ostali podatki
| Sekundarni jezik: | Slovenski jezik |
|---|---|
| Sekundarne ključne besede: | vrenje;koeficient toplotne prestopnosti;kritična gostota toplotnega toka;lasersko teksturiranje;omočljivost; |
| Vrsta dela (COBISS): | Članek v reviji |
| Strani: | str. 1-17 |
| Zvezek: | ǂVol. ǂ57, [article no.] 104357 |
| Čas izdaje: | May 2024 |
| DOI: | 10.1016/j.csite.2024.104357 |
| ID: | 23412240 |
Priporočena dela:
Elucidating the effects of surface wettability on boiling heat transfer using hydrophilic and hydrophobic surfaces with laser-etched microchannels
2024,
ni podatka o podnaslovu
Karakteristike prenosa toplote pri vrenju binarnih zmesi
2023,
diplomsko delo Visokošolskega strokovnega študijskega programa I. stopnje Strojništvo - Projektno aplikativni program
Izboljšan prenos toplote pri vrenju na kemično obdelanih bakrenih površinah
2020,
magistrsko delo magistrskega študijskega programa II. stopnje Strojništvo
Izboljšanje prenosa toplote pri vrenju s strukturiranjem površin preko elektrodepozicije
2023,
zaključna naloga Univerzitetnega študijskega programa I. stopnje Strojništvo - Razvojno raziskovalni program
Kritična gostota toplotnega toka na lasersko strukturirani površini pri mehurčkastem vrenju FC-72
2018,
magistrsko delo magistrskega študijskega programa II. stopnje Strojništvo