diplomska naloga
Danaja Cundrič (Avtor), Janko Logar (Mentor), Matej Maček (Komentor)

Povzetek

Pred izdajo novega predstandarda Evrokod 7 konec leta 2022 je bila armirana zemljina zajeta v nemških smernicah EBGEO, ki so jih projektanti velikokrat kombinirali z Evrokodom 7:2005. Novi predstandard EC7:2022 vključuje poglavje o armirani zemljini, vendar način dokazovanja varnosti geotehničnih konstrukcij definira drugače kot EBGEO. V diplomski nalogi smo na konkretnem primeru armiranega nasipa primerjali potrebne dolžine in natezne nosilnosti armaturnega geosintetika po treh standardih: EC7:2005, EBGEO in EC7:2022. Ugotovili smo, da so formalne razlike v postopkih minimalne, prav tako se izračunane dolžine geomrež le malo razlikujejo. Opazna pa je razlika pri izračunu potrebne natezne trdnosti geosintetika, kjer nov evrokod predpisuje manjši delni faktor varnosti za mehansko odpornost geosintetikov 𝛾𝑀 (1,1) kot EBGEO (1,4), kar vpliva na rezultate dimenzioniranja.

Ključne besede

gradbeništvo;diplomske naloge;UNI;GR;B-GR;EBGEO;EC7:2005;EC7:2022;armirana zemljina;podporne konstrukcije;

Podatki

Jezik: Slovenski jezik
Leto izida:
Tipologija: 2.11 - Diplomsko delo
Organizacija: UL FGG - Fakulteta za gradbeništvo in geodezijo
Založnik: [D. Cundrič]
UDK: 006.77:624.131(043.2)
COBISS: 200250115 Povezava se bo odprla v novem oknu
Št. ogledov: 702
Št. prenosov: 149
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Angleški jezik
Sekundarni naslov: Analysis of reinforced fill structures according to the proposal of the Eurocode standard prEN 1997-3
Sekundarni povzetek: Before the new Eurocode 7 pre-standard was issued at the end of 2022, reinforced soil was covered by the German EBGEO guidelines, which designers often used in combination with Eurocode 7:2005. The new pre-standard EC7:2022 includes a chapter on reinforced soil, but also defines the approach of proving the safety of geotechnical constructions differently from EBGEO. In the thesis, we compared the required lengths and tensile strengths of the reinforcement geosynthetics according to the three standards EC7:2005, EBGEO, and EC7:2022, using a specific example of a reinforced embankment. We found that the formal differences in procedures were minimal, and the calculated lengths of geogrids differed only slightly between the three standards. However, a noticeable difference arises in the calculation of the required tensile strength of geosynthetics, where the new Eurocode prescribes a smaller partial safety factor for the mechanical resistance of geosynthetics 𝛾𝑀 (1.1), compared to EBGEO (1.4), affecting the dimensioning results.
Sekundarne ključne besede: graduation thesis;civil engineering;reinforced fill structure;retaining structures;
Vrsta dela (COBISS): Diplomsko delo/naloga
Komentar na gradivo: Univ. v Ljubljani, Fak. za gradbeništvo in geodezijo
Strani: X, 32 str.
ID: 24480086