ǂa ǂnovel inverse characterization method
Kristof Denys (Avtor), Niels Vancraeynest (Avtor), Steven Cooreman (Avtor), Marco Rossi (Avtor), Sam Coppieters (Avtor)

Povzetek

Due to the production process, thick high strength steel plates potentially exhibit inhomogeneous plastic material behavior through the thickness. For example, the initial yield stress and work hardening behavior might vary through the plate thickness. In order to establish a reliable plasticity model that can be used in finite element simulations to optimize forming processes or to investigate the structural integrity of large structures, this material behavior needs to be characterized. A straightforward characterization method consists of slicing the thick high strength steel plate and conducting standard tensile tests. However, this approach comes with a large experimental effort. A novel specimen is proposed enabling to inversely identify the work hardening behavior at distinct locations through the thickness of a thick steel plate. To this end, a tensile specimen with circular pockets at different depths is used. The strain fields within the pockets are captured using digital image correlation (DIC). finite element model updating (FEMU) is used to inversely identify a predefined strain hardening law for each pocket. First, the procedure is optimized and numerically verified using virtual experiments generated by a finite element model with a known variation of the work hardening behavior. Finally, the procedure is experimentally validated by characterizing the strain hardening behavior of a 10 mm thick S690QL grade.

Ključne besede

through thickness strain hardening;FEMU;Nelder-Mead;stereo-DIC;S690QL;thick high strength steel;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: UL FS - Fakulteta za strojništvo
UDK: 620.1:669.1
COBISS: 211347203 Povezava se bo odprla v novem oknu
ISSN: 0039-2480
Št. ogledov: 23
Št. prenosov: 720
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Slovenski jezik
Sekundarni naslov: Variabilnost preoblikovalnega utrjanja po globini pri debelih ploščah iz jekla visoke trdnosti: nova metoda inverzne karakterizacije
Sekundarne ključne besede: preoblikovalno utrjanje po globini;FEMU;Nelder-Mead;stereo DIC;S690QL;debelo jeklo visoke trdnosti;
Vrsta dela (COBISS): Članek v reviji
Strani: str. 417-425
Letnik: ǂVol. ǂ70
Zvezek: ǂno. ǂ9/10
Čas izdaje: Sept.-Oct. 2024
DOI: 10.5545/sv-jme.2024.1037
ID: 25300939