Tereni primerni za strojno pridobivanje lesa v gozdnogospodarskem območju Postojna

diplomsko delo - univerzitetni študij

Emil Zabukovec (Avtor), Janez Krč (Mentor)

Povzetek

Namen naloge je bil analizirati razlike in podobnosti med odseki, ki so bili kot primerni za strojno sečnjo izločeni v raziskavi leta 2002 (Krč, 2002), in odseki, v katerih je strojna sečnja do sedaj že bila izvedena. Glede primernosti delovišč so bili anketirani revirni gozdarji. Opravljena je bila analiza vremenskih razmer za delovišča, v katerih so zaznali sledi zmanjšane nosilnosti tal. Količinska analiza je bila opravljena za vsa delovišča. Terenska snemanja so potekala novembra in decembra 2010 v gozdnogospodarskem območju Postojna. Skupno je bilo popisanih 52 delovišč s površino 626 ha. Delovišča so razdelili na delovišča prilagojene in delovišča popolne strojne sečnje. Analiza je pokazala, da je strojna sečnja potekala tudi na naklonih nad 30 % in v deloviščih, v katerih so skalovitost ocenili s 4. razredom po kanadski lestvici. Delež iglavcev v lesni zalogi v nobenem delovišču ni bil pod 50 %, večinoma se je gibal med 70 in 90 %. Revirni gozdarji so bolje ocenili delovišča popolne strojne sečnje. Težave z nosilnostjo tal so se pojavljale le v 20 % delovišč, večinoma so težave lahko pojasnili z analizo vremenskih razmer. Analiza posekanih količin je pokazala, da jakost poseka v največ primerih znaša 50-75 m3/ha. Napoved primernosti odsekov za strojno sečnjo iz leta 2002 se s stanjem na terenu najbolje ujema v ohlapni različici omejitvenih dejavnikov (do 40 % naklona, nad 60 % iglavcev in do 60 % skalovitosti).

Ključne besede

strojna sečnja;delovišča;teren;Postojna;kras;

Podatki

Jezik:	Slovenski jezik
Leto izida:	2012
Izvor:	Ljubljana
Tipologija:	2.11 - Diplomsko delo
Organizacija:	UL BF - Biotehniška fakulteta
Založnik:	[E. Zabukovec]
UDK:	630*31
COBISS:	3390374
Št. ogledov:	734
Št. prenosov:	286
Ocena:	0 (0 glasov)
Metapodatki:

Ostali podatki

Sekundarni jezik:	Neznan jezik
Sekundarni naslov:	Terrains, suitable for mechanised cutting in regional forest management unit Postojna
Sekundarni povzetek:	The purpose of the study was to analyze differences and similarities between sections that were excluded in the study in 2002 (Krč, 2002) due to being appropriate for mechanized cutting and sections where mechanized cutting was already carried out. District foresters were surveyed about appropriateness of work sites. An analysis of weather conditions was carried out for work sites where traces of reduced soil bearing capacity were detected. A quantity analysis was performed for all work sites. Field research was carried out in November and December 2010 in the Postojna Forest Management Unit. In total, fifty-two work sites measuring 626 ha were recorded. Work sites were divided into the work sites of adjusted mechanized cutting and the work sites of full mechanized cutting. The analysis showed that mechanized cutting was also carried out on slopes greater than 30 % and in the work sites where rockiness was evaluated with the fourth class according to the Canadian scale. The shareof conifers in the growing stock was never below 50 % in any work site, it mostly ranged from 70 % to 90 %. District foresters evaluated the work sites of full mechanized cutting as being better. Problems with soil bearing capacity occurred in only 20 % of the work sites, we could explain most problems with the analysis of weather conditions. The analysis of the cutting amount showed that in most cases the intensity of cutting is 50-75 m3/ha. The prediction of the appropriateness of sections for mechanized cutting in 2002 agrees best with the real situation in a loose variant of restricting factors (a slope up to 40 %, above 60 % conifers and rockiness up to 60 %).
Vrsta dela (COBISS):	Diplomsko delo
Komentar na gradivo:	Univerza v Ljubljani, Biotehniška fakulteta, oddelek za gozdarstvo in obnovljive gozdne vire
Strani:	VIII, 68 str.
Ključne besede (UDK):	applied sciences;medicine;technology;uporabne znanosti;medicina;tehnika;agriculture and related sciences and techniques;forestry;farming;wildlife exploitation;kmetijstvo ter sorodne vede in tehnologije;forestry;gozdarstvo;work science (work studies) in forestry;harvesting of wood: logging and transport;forest engineering;študij dela v gozdarstvu;sečnja in prevoz lesa;gozdarsko inženirstvo;
ID:	56736