diplomska naloga
Darko Kovačič (Avtor), Jože Korelc (Mentor), Jože Lopatič (Član komisije za zagovor), Tomo Cerovšek (Član komisije za zagovor)

Povzetek

Nosilnost jeklenih nosilcev z odprtinami v stojini in jeklenih satastih nosilcev

Ključne besede

gradbeništvo;diplomska dela;VSŠ;nosilci z odprtinami;satasti nosilci;dimenzioniranje;bočna zvrnitev;napredni računalniški program;

Podatki

Jezik: Slovenski jezik
Leto izida:
Izvor: Ljubljana
Tipologija: 2.11 - Diplomsko delo
Organizacija: UL FGG - Fakulteta za gradbeništvo in geodezijo
Založnik: [D. Kovačič]
UDK: 004.42:624.014.2:624.072.2(043.2)
COBISS: 5077601 Povezava se bo odprla v novem oknu
Št. ogledov: 3217
Št. prenosov: 468
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Angleški jezik
Sekundarni naslov: Resistance of steel beams with web openings and castellated beams
Sekundarni povzetek: In Diploma demonstration of bending and shear resistance of steel beams with openings in web and for castellated beams is being presented. Dimensioning of such beams is performed in compliance with general rules by Eurocode for dimensioning of beams by considering speciality of beams with openings or by non-linear analysis with consideration of imperfections. For delimit of beams with openings from castellated beams, geometric criteria are being used. Further approach to the dimensioning of these two types of beams depends on mentioned geometric delimitations. Resistance to lateral torsional buckling, for castellated beams and beams with openings, is demonstrated in the same way as solid web beams, by taking geometric and static characteristics of the cross-sectional area at the place opening into account. It is possible to more accurately determine the behaviour of beams with openings by using advanced computer software than by already established methods by Eurocodes. For the purpose of the Diploma a program »AceGirder« had been written, in which the user can choose from different types of beams, such as castellated beams and beams with a single or multiple openings. Software carries out a statistic analysis at a given load, analysis of the limit load and stability.
Sekundarne ključne besede: civil engineering;graduation thesis;beams with openings;castellated beams;design;lateral torsional buckling;advanced computer software;
Vrsta datoteke: application/pdf
Vrsta dela (COBISS): Diplomsko delo
Komentar na gradivo: Univ. v Ljubljani, Fak. za gradbeništvo in geodezijo
Strani: IX, 162 str., pril.
Vrsta dela (ePrints): thesis
Naslov (ePrints): Resistance of steel beams with web openings and castellated beams
Ključne besede (ePrints): nosilci z odprtinami;satasti nosilci;dimenzioniranje;bočna zvrnitev;napredni računalniški program
Ključne besede (ePrints, sekundarni jezik): beams with openings;castellated beams;design;lateral torsional buckling;advanced computer software
Povzetek (ePrints): V diplomskem delu je predstavljeno dokazovanje upogibne in striţne nosilnosti za jeklene nosilce z odprtinami v stojini in za jeklene sataste nosilce. Dimenzioniranje takih nosilcev se izvaja v skladu s splošnimi pravili Evrokoda za dimenzioniranje nosilcev z upoštevanjem posebnosti nosilcev z odprtinami ali pa z nelinearno prostorsko analizo z upoštevanjem imperfektnosti. Za razmejitev nosilcev z odprtinami od satastih nosilcev se uporabljajo geometrijski kriteriji. Od teh geometrijskih razmejitev je odvisen nadaljni pristop k dimenzioniranju nosilcev z odprtinami, oziroma satastih nosilcev. Nosilnost pri bočni zvrnitvi pri satastih nosilcih in pri nosilcih z odprtinami se dokazuje enako kot pri polnostenskih nosilcih z upoštevanjem geometrijskih in statičnih karakteristih prečnega prereza na mestu odprtine. Z uporabo naprednih računalniških programov je mogoče natančneje določiti obnašanje nosilcev z odprtinami, kot z uporabo uveljavljenih metod po Evrokodu, zato je bil za diplomsko nalogo narejen program AceGirder, v katerem je moţna izbira med satastimi nosilci, nosilci z enojno odprtino in nosilci z večimi odprtinami. S programom se dela statično analizo pri dani obteţbi, analizo mejne nosilnosti in stabilnostno analizo.
Povzetek (ePrints, sekundarni jezik): In Diploma demonstration of bending and shear resistance of steel beams with openings in web and for castellated beams is being presented. Dimensioning of such beams is performed in compliance with general rules by Eurocode for dimensioning of beams by considering speciality of beams with openings or by non-linear analysis with consideration of imperfections. For delimit of beams with openings from castellated beams, geometric criteria are being used. Further approach to the dimensioning of these two types of beams depends on mentioned geometric delimitations. Resistance to lateral torsional buckling, for castellated beams and beams with openings, is demonstrated in the same way as solid web beams, by taking geometric and static characteristics of the cross-sectional area at the place opening into account. It is possible to more accurately determine the behaviour of beams with openings by using advanced computer software than by already established methods by Eurocodes. For the purpose of the Diploma a program »AceGirder« had been written, in which the user can choose from different types of beams, such as castellated beams and beams with a single or multiple openings. Software carries out a statistic analysis at a given load, analysis of the limit load and stability.
Ključne besede (ePrints, sekundarni jezik): beams with openings;castellated beams;design;lateral torsional buckling;advanced computer software
ID: 8310589