Sekundarni jezik: |
Angleški jezik |
Sekundarni naslov: |
Analysis of the use of geodetic GNSS methods for movements monitoring |
Sekundarni povzetek: |
This thesis introduces the problem of monitoring of built facilities and critical, unfriendly natural areas within the geodetic measurements for the needs of geotechnical engineering. The main objective of the thesis, which is supported by practical examples of monitoring the stability area of the small geodynamical network Velenje Coal Mine, is to show and present the methods and the process of the deformation surveys that are based on long-term periodic measurements, with emphasis on the use of global navigation systems (GNSS). Within this project the presentation of GNSS technology is included. This technology nowadays enables us a high point of specifying the position and by that facilitating the monitoring of movements and deformations in this areas. Another thing presented in this thesis is the process of determining the point displacements in geodetic networks, as an intermediate stage between the adjustment of respective epoch measurements and in-depth deformation analysis. However the main objective of this thesis is to demonstrate the importance of respecting the actual velocity vectors of reference points in the process of balancing individual epochs and to provide an illustration of a simple procedure for the rapid, statistic based evaluation of deformation / movement in the region. |
Sekundarne ključne besede: |
geodetic monitoring;GNSS;geodetic network;base vector;deformation analysis;movements;error ellipse; |
Vrsta datoteke: |
application/pdf |
Vrsta dela (COBISS): |
Diplomsko delo |
Komentar na gradivo: |
Univ. v Ljubljani, Fak. za gradbeništvo in geodezijo |
Strani: |
XV, 110 str., [26] str. pril. |
Vrsta dela (ePrints): |
thesis |
Naslov (ePrints): |
Analysis of the use of geodetic gGNSS methods for movements monitoring |
Ključne besede (ePrints): |
deformacijski monitoring;GNSS izmera;geodetska mreža;bazni vektor;terminska izmera;deformacijska analiza;ugotavljanje premikov |
Ključne besede (ePrints, sekundarni jezik): |
geodetic monitoring;GNSS;geodetic network;base vector;deformation analysis;movements;error ellipse |
Povzetek (ePrints): |
Diplomska naloga predstavlja problematiko spremljanja stabilnosti (monitoringa) grajenih objektov in kritičnih, človeku nevarnih naravnih območij v sklopu geodetskih meritev. Glavni cilj naloge, ki je podkrepljen s praktičnim primerom spremljanja stabilnosti površine na območju male geodinamične mreže Premogovnika Velenje, je prikazati in podrobneje predstaviti metode in postopke deformacijskih raziskav, ki slonijo na dolgoročnih periodičnih meritvah, s poudarkom na uporabi globalnih navigacijskih sistemov (GNSS). Znotraj tega projekta je zajeta predstavitev GNSS tehnologije, ki omogoča visoko natančno določitev položaja točke ter nam tako olajša ugotavljanje/spremljanje premikov in deformacij večjih območij. Predstavljen je tudi postopek ugotavljanja premikov točk v geodetskih mrežah, kot vmesna faza med izravnavo opazovanj ter podrobno deformacijsko analizo. Osnovni cilj naloge je pokazati pomembnost upoštevanja dejanskih vektorjev hitrosti referenčnih točk v postopku izravnave posamezne terminske izmere ter podati ilustracijo enostavnega postopka za hitro, statistično oceno deformacij/premikov na obravnavanem območju. |
Povzetek (ePrints, sekundarni jezik): |
This thesis introduces the problem of monitoring of built facilities and critical, unfriendly natural areas within the geodetic measurements for the needs of geotechnical engineering. The main objective of the thesis, which is supported by practical examples of monitoring the stability area of the small geodynamical network Velenje Coal Mine, is to show and present the methods and the process of the deformation surveys that are based on long-term periodic measurements, with emphasis on the use of global navigation systems (GNSS). Within this project the presentation of GNSS technology is included. This technology nowadays enables us a high point of specifying the position and by that facilitating the monitoring of movements and deformations in this areas. Another thing presented in this thesis is the process of determining the point displacements in geodetic networks, as an intermediate stage between the adjustment of respective epoch measurements and in-depth deformation analysis. However the main objective of this thesis is to demonstrate the importance of respecting the actual velocity vectors of reference points in the process of balancing individual epochs and to provide an illustration of a simple procedure for the rapid, statistic based evaluation of deformation / movement in the region. |
Ključne besede (ePrints, sekundarni jezik): |
geodetic monitoring;GNSS;geodetic network;base vector;deformation analysis;movements;error ellipse |
ID: |
8311967 |