geodetska izmera horizontalnih premikov geodetskih točk na pregradnih objektih HE Vrhovo
Sekundarni jezik: |
Angleški jezik |
Sekundarni naslov: |
GNSS-RTK-instrument testing using ISO-standard 17123-8 |
Sekundarni povzetek: |
In the thesis is presented the ISO standard ISO 17123-8, which represents the methods of
testing of GNSS-RTK measurement included, for the determination of the position in real
time, based on an assessment of the quality of the hardware and software of each instrument.
The test can be done anywhere on the fileld, where provided the conditions for the
implementation of the GNSS-RTK observations. The test does not require additional software
tools for processing the data measurements, since the statistical evaluation of the results of the
observations are quite easy. In the thesis are presented also the results of the practical tests on
the reference values, different manufacturers, different periods of observation and of different
length of the vectors. For the examination of the instruments used were the producer Leica,
Topcon and Trimble. |
Sekundarne ključne besede: |
GNSS;calibration;instrument field testing;standard
ISO 17123-8 |
Vrsta datoteke: |
application/pdf |
Vrsta dela (COBISS): |
Temeljna raziskava |
Strani: |
29 str., pril. |
Vrsta dela (ePrints): |
thesis |
Naslov (ePrints): |
GNSS-RTK-instrument testing using ISO-standard 17123-8 |
Ključne besede (ePrints): |
GNSS;kalibracija;terensko preizkušanje instrumentov;standard
ISO 17123-8 |
Ključne besede (ePrints, sekundarni jezik): |
GNSS;calibration;instrument field testing;standard
ISO 17123-8 |
Povzetek (ePrints): |
V nalogi je predstavljen standard ISO 17123-8, ki predstavlja postopke preizkušanja GNSSRTK
merskega instrumentarija, za določanje položaja v realnem času, ki temeljijo na oceni
kakovosti delovanja strojne in programske opreme posameznega instrumenta. Preizkus lahko
opravimo kjerkoli na terenu, kjer so zagotovljeni pogoji za izvedbo GNSS-RTK opazovanj.
Preizkus ne zahteva dodatnega programskega orodja za obdelavo podatkov meritev, saj je
statistično vrednotenje rezultatov opazovanj dokaj enostavno. V nalogi so predstavljeni tudi
rezultati praktičnih preizkusov glede na referenčne vrednosti, različne proizvajalce, različna
obdobja opazovanja in različne dolžine vektorjev. Za preizkus so bili uporabljeni instrumenti
proizvajalcev Leica, Trimble in Topcon. |
Povzetek (ePrints, sekundarni jezik): |
In the thesis is presented the ISO standard ISO 17123-8, which represents the methods of
testing of GNSS-RTK measurement included, for the determination of the position in real
time, based on an assessment of the quality of the hardware and software of each instrument.
The test can be done anywhere on the fileld, where provided the conditions for the
implementation of the GNSS-RTK observations. The test does not require additional software
tools for processing the data measurements, since the statistical evaluation of the results of the
observations are quite easy. In the thesis are presented also the results of the practical tests on
the reference values, different manufacturers, different periods of observation and of different
length of the vectors. For the examination of the instruments used were the producer Leica,
Topcon and Trimble. |
Ključne besede (ePrints, sekundarni jezik): |
GNSS;calibration;instrument field testing;standard
ISO 17123-8 |
ID: |
8312006 |