Spajanje lesenih elementov s pomočjo krempljastih plošč

Povzetek

Ključne besede

Podatki

Jezik:	Slovenski jezik
Leto izida:	2012
Izvor:	Ljubljana
Tipologija:	2.11 - Diplomsko delo
Organizacija:	UL FGG - Fakulteta za gradbeništvo in geodezijo
Založnik:	[M. Hozjan]
UDK:	624.011.1(043.2)
COBISS:	5750881
Št. ogledov:	2912
Št. prenosov:	711
Ocena:	0 (0 glasov)
Metapodatki:

Ostali podatki

Sekundarni jezik:	Angleški jezik
Sekundarni naslov:	Connections of timber elements made with punched metal plates
Sekundarni povzetek:	In the graduation thesis trusses with punched metal plates are presented. These kind of constructions are mostly used for dwelling houses, with spans up to 35 m. Trusses are prefabricated elements, they are composed in such structures like roof and are products of specialised companies. Such systems are well known in the world and it is considered that they can simplify, speed up and reduce the building costs of wooden structures. Special concern must be taken to the installation of trusses, because they don't have resistance to the out of plane loads. Hereafter are presented joints of prefabricated trusses, according to SIST EN 1995-1-1:2005. The tool was made in Excel, for calculating the load capacity of joints made with punched metal plates, based on an example of a knee joint. The tool was made with Microsoft Visual Basic for Applications program, which is a development tool build in Microsoft Office. At the end of the graduation thesis, the results of an analytical example were compared with the results obtained by the tool.
Sekundarne ključne besede:	graduation thesis;civil engineering;joints;punched metal plates;knee joints;VBA Excel;example;prefabricated elements made of wood;
Vrsta datoteke:	application/pdf
Vrsta dela (COBISS):	Diplomsko delo
Komentar na gradivo:	Univ. v Ljubljani, Fak. za gradbeništvo in geodezijo
Strani:	XIV, 65 str., 2 pril.
Vrsta dela (ePrints):	thesis
Naslov (ePrints):	Connections of timber elements made with punched metal plates
Ključne besede (ePrints):	Spoji;ježevke;krempljaste plošče;kolenski spoj;VBA Excel;računski primer;leseni prefabricirani elementi
Ključne besede (ePrints, sekundarni jezik):	Joints;punched metal plates;knee joints;VBA Excel;example;prefabricated elements made of wood
Povzetek (ePrints):	V diplomski nalogi so predstavljeni leseni prefabricirani elementi, ki so med seboj spojeni s krempljastimi ploščami. Najpogostejše so palične strešne konstrukcije, ki se ponavadi uporabljajo pri leseni montažni gradnji in imajo lahko razpone do 35 m. Prefabricirani elementi sestavljajo sisteme, kot so na primer ostrešja, ki se prodajajo kot končni proizvod s strani specializiranih podjetij. V svetu že dlje časa poznajo prednosti takih sistemov, ki poenostavijo, pocenijo in pospešijo gradnjo lesenih konstrukcij. Posebno pozornost je potrebno posvetiti tudi pogojem montaže, saj so elementi občutljivi na obremenitve, ki delujejo izven njihove ravnine. V nadaljevanju diplomske naloge so predstavljeni spoji v prefabriciranem strešnem elementu in njihovo dimenzioniranje po standardu SIST EN 1995-1-1:2005. Za primer kolenskega spoja je narejen pripomoček za izračun nosilnosti spojev v programu Excel. Pri izdelavi pripomočka je bil uporabljen program Microsoft Visual Basic for Applications, ki je razvojno okolje, vgrajeno v Microsoft Office. V računskem primeru, na koncu diplomske naloge, so med seboj primerjani rezultati analitičnega računa, z rezultati, ki jih dobimo s pripomočkom za izračun spojev.
Povzetek (ePrints, sekundarni jezik):	In the graduation thesis trusses with punched metal plates are presented. These kind of constructions are mostly used for dwelling houses, with spans up to 35 m. Trusses are prefabricated elements, they are composed in such structures like roof and are products of specialised companies. Such systems are well known in the world and it is considered that they can simplify, speed up and reduce the building costs of wooden structures. Special concern must be taken to the installation of trusses, because they don't have resistance to the out of plane loads. Hereafter are presented joints of prefabricated trusses, according to SIST EN 1995-1-1:2005. The tool was made in Excel, for calculating the load capacity of joints made with punched metal plates, based on an example of a knee joint. The tool was made with Microsoft Visual Basic for Applications program, which is a development tool build in Microsoft Office. At the end of the graduation thesis, the results of an analytical example were compared with the results obtained by the tool.
Ključne besede (ePrints, sekundarni jezik):	Joints;punched metal plates;knee joints;VBA Excel;example;prefabricated elements made of wood
ID:	8312305