diplomska naloga
Primož Zelenec (Avtor), Janko Logar (Mentor), Tomo Cerovšek (Član komisije za zagovor), Jože Korelc (Član komisije za zagovor), Jože Lopatič (Komentor)

Povzetek

Projektiranje podpornega in opornega zidu za potrebe skladiščenja lesa

Ključne besede

diplomska dela;gradbeništvo;VSŠ;OG-MK;podporne konstrukcije;podporni zid;oporni zid;dimenzioniranje;

Podatki

Jezik: Slovenski jezik
Leto izida:
Izvor: Ljubljana
Tipologija: 2.11 - Diplomsko delo
Organizacija: UL FGG - Fakulteta za gradbeništvo in geodezijo
Založnik: [P. Zelenec]
UDK: 624.131.53(043.2)
COBISS: 6022497 Povezava se bo odprla v novem oknu
Št. ogledov: 5363
Št. prenosov: 1098
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Angleški jezik
Sekundarni naslov: ǂThe ǂdesign of retaining and support wall for the purpose of wood storage
Sekundarni povzetek: The thesis contains a project about retaining and support structure for the purpose of wood storage. The problem and the basic idea of the two constructions are presented in the introduction of the thesis. In brief, we also describe the types of retaining constructions. Next, we present fieldwork and laboratory research. During fieldwork we took measurements for drawing cross-section profiles and dug three excavation holes, from which we have taken samples for further analysis in the laboratory, where we later continued the research. The research was then followed by the static analysis of retaining and support constructions. We used the rules of Eurocode 7. After that we determined the final geometry of the cross-section in the two structures, which passed all the necessary control tests. On the basis of a combination of effects acting on the structure we calculated internal forces, onto which we designed the reinforcements. At the end we showed the selected reinforcements in a cross-section design and made an inventory of all reinforcements in the constructions.?
Sekundarne ključne besede: graduation thesis;civil engineering;retaining constructions;retaining wall;support wall;design;
Vrsta datoteke: application/pdf
Vrsta dela (COBISS): Diplomsko delo
Komentar na gradivo: Univ. v Ljubljani, Fak. za gradbeništvo in geodezijo
Strani: X, 51 str., 26 str. pril.
Vrsta dela (ePrints): thesis
Naslov (ePrints): The design of retaining and support wall for the purpose of wood storage
Ključne besede (ePrints): podporne konstrukcije;podporni zid;oporni zid;dimenzioniranje
Ključne besede (ePrints, sekundarni jezik): retaining constructions;retaining wall;support wall;design
Povzetek (ePrints): Diplomska naloga obsega projekt podporne in oporne konstrukcije za potrebe skladiščenja lesa. Na začetku diplomske naloge je predstavljen problem in idejna zasnova konstrukcij. Na kratko smo opisali tudi vrste podpornih konstrukcij. V nadaljevanju so predstavljene preiskave na terenu in v laboratoriju. Pri preiskavah na terenu smo opravili meritve za izris profilov ter izvedli tri sondažne izkope, iz katerih smo odvzeli vzorce za nadaljnjo analizo v laboratoriju, kjer smo opravili ostale preiskave. Sledila je statična presoja podporne in oporne konstrukcije po Evrokodu 7, po kateri smo določili končno geometrijo prereza konstrukcije, ki izpolnjuje vse kontrole. Na osnovi kombinacij vplivov, ki delujejo na konstrukcije, smo izračunali notranje sile, na katere smo dimenzionirali potrebno armaturo. Na koncu smo prikazali izbrano armaturo v prerezu konstrukcije in izdelali popis armature.
Povzetek (ePrints, sekundarni jezik): The thesis contains a project about retaining and support structure for the purpose of wood storage. The problem and the basic idea of the two constructions are presented in the introduction of the thesis. In brief, we also describe the types of retaining constructions. Next, we present fieldwork and laboratory research. During fieldwork we took measurements for drawing cross-section profiles and dug three excavation holes, from which we have taken samples for further analysis in the laboratory, where we later continued the research. The research was then followed by the static analysis of retaining and support constructions. We used the rules of Eurocode 7. After that we determined the final geometry of the cross-section in the two structures, which passed all the necessary control tests. On the basis of a combination of effects acting on the structure we calculated internal forces, onto which we designed the reinforcements. At the end we showed the selected reinforcements in a cross-section design and made an inventory of all reinforcements in the constructions.?
Ključne besede (ePrints, sekundarni jezik): retaining constructions;retaining wall;support wall;design
ID: 8312542
Priporočena dela:
, projektna naloga univerzitetnega študijskega programa 1. stopnje
, diplomsko delo visokošolskega študijskega programa