Jožef Predan (Avtor), Nenad Gubeljak (Avtor), Otmar Kolednik (Avtor)

Povzetek

A material inhomogeneity in the direction of crack extension causes a difference between the near-tip crack driving force, Jtip, and the nominally applied far-field crack driving force, Jfar. This difference can be quantified by a material inhomogeneity term, Cinh, which is evaluated by a post-processing procedure to a conventional finite element stress analysis. The magnitude of the material inhomogeneity term is evaluated for cracks in an inhomogeneous welded joint made of a high-strength low-alloy steel. Both a crack proceeding from the under-matched (UM) to the over-matched (OM) and from the OM to the UM weld metal are treated. The effects of the inhomogeneity of the different material parameters (modulus of elasticity, yield strength, and strain hardening exponent) on Cinh and Jtip are systematically studied. The results demonstrate that the material inhomogeneity term is primarily influenced by the inhomogeneity of the yield strength. A crack growing towards an OM/UM interface experiences an accelerated crack growth rate or a pop-in, an UM/OM interface leads to a reduced crack growth rate or a crack arrest. The application of global assessment methods of the mismatch effect which are included in the Engineering Treatment Model (ETM) or in the Structural Integrity Assessment Procedures for European Industry (SINTAP) is discussed.

Ključne besede

gonilna sila razvoja razpoke;nehomogenost materiala;nehomogeni zvarni spoj;meja nehomogenosti;J-integral;modeliranje končnih elementov;crack driving force;material inhomogeneity;mismatched weld;interface;finite element modeling;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: UM FS - Fakulteta za strojništvo
UDK: 621.791.05:539.42
COBISS: 11157526 Povezava se bo odprla v novem oknu
ISSN: 0013-7944
Št. ogledov: 1272
Št. prenosov: 75
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Angleški jezik
Sekundarne ključne besede: gonilna sila razvoja razpoke;nehomogenost materiala;nehomogeni zvarni spoj;meja nehomogenosti;J-integral;modeliranje končnih elementov;
URN: URN:SI:UM:
Strani: str. 1739-1757
Letnik: ǂVol. ǂ74
Zvezek: ǂiss. ǂ11
Čas izdaje: July 2007
ID: 8717015