Intelligent cutting tool condition monitoring in milling

Uroš Župerl (Avtor), Franc Čuš (Avtor), Jože Balič (Avtor)

Povzetek

Purpose: of this paper is to present a tool condition monitoring (TCM) system that can detect tool breakage in real time by using a combination of neural decision system, ANFIS tool wear estimator and machining error compensation module. Design/methodology/approach: The principal presumption was that the force signals contain the most useful information for determining the tool condition. Therefore, ANFIS method is used to extract the features of tool states from cutting force signals. The trained ANFIS model of tool wear is then merged with a neural network for identifying tool wear condition (fresh, worn). Findings: The overall machining error is predicted with very high accuracy by using the deflection module and a large percentage of it is eliminated through the proposed error compensation process. Research limitations/implications: This study also briefly presents a compensation method in milling in order to take into account tool deflection during cutting condition optimization or tool-path generation. The results indicate that surface errors due to tool deflections can be reduced by 65-78%. Practical implications: The fundamental limitation of research was to develop a single-sensor monitoring system, reliable as commercially available system, but much cheaper than multi-sensor approach. Originality/value: A neural network is used in TCM as a decision making system to discriminate different malfunction states from measured signals.

Ključne besede

tool condition monitoring;TCM;wear;tool deflection;ANFIS;neural network;end-milling;

Podatki

Jezik:	Angleški jezik
Leto izida:	2011
Tipologija:	1.01 - Izvirni znanstveni članek
Organizacija:	UM FS - Fakulteta za strojništvo
UDK:	621.9:004.89
COBISS:	15846422
ISSN:	1734-8412
Št. ogledov:	1229
Št. prenosov:	30
Ocena:	0 (0 glasov)
Metapodatki:

Ostali podatki

Sekundarni jezik:	Angleški jezik
URN:	URN:SI:UM:
Strani:	str. 477-486
Letnik:	ǂVol. ǂ49
Zvezek:	ǂiss. ǂ2
Čas izdaje:	Dec. 2011
ID:	8718249