diplomska naloga
Domen Pungerčar (Avtor), Boštjan Brank (Mentor), Tomo Cerovšek (Član komisije za zagovor), Janko Logar (Član komisije za zagovor), Tatjana Isaković (Komentor)

Povzetek

V diplomski nalogi analiziramo in projektiramo nosilec, ki je del strešne konstrukcije. Za izbrani element izvedemo dva različna sistema in sicer nosilec z mehko armaturo ter prednapeti nosilec. Konstrukcijski element je dolžine 24.7 metra s spremenljivo višino, ki znaša ob podporah 1.25 metra ter na sredini 1.55 metra. Projektiranje izvajamo skladno s zahtevami standarda DIN EN 1992-1-1:2010. V prvem delu analiziramo obtežbo in obtežne kombinacije za oba sistema. Za kombinacije, ki jih v nalogi potrebujemo pri računanju, so izvedeni in grafično prikazani statični izračuni. Kontrole za mejno stanje nosilnosti ter mejno stanje uporabnosti smo izvedli za oba sistema. Za oba sistema določimo potrebno strižno ter vzdolžno armaturo. Zaradi nesimetričnosti prečnega prereza dodatno izvedemo kontrolo torzijske obremenitve. Za prednapeti nosilec smo potrebno dodatno armaturo izvrednotili še za transport ter vgradnjo. Za prednapeti nosilec je določena potrebna napenjalna sila ter izgube. Izvedene so kontrole vertikalnih pomikov za oba sistema na nerazpokanem in razpokanem prerezu. Pri prednapetem nosilcu so zajeti pozitivni učinki na pomike zaradi prednapetja. Na koncu naloge so prikazani armaturni načrti.

Ključne besede

gradbeništvo;diplomska naloga;UNI;prednapetje;armiran nosilec;analiza obtežbe;nosilnost;vertikalni pomiki;Evrokodi;

Podatki

Jezik: Slovenski jezik
Leto izida:
Tipologija: 2.11 - Diplomsko delo
Organizacija: UL FGG - Fakulteta za gradbeništvo in geodezijo
Založnik: [D. Pungerčar]
UDK: 624.012.45:624.072.2(043.2)
COBISS: 7641441 Povezava se bo odprla v novem oknu
Št. ogledov: 1688
Št. prenosov: 547
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Angleški jezik
Sekundarni naslov: Design of reinforced concrete structural element
Sekundarni povzetek: In the thesis, we analyse and design a beam which is part of a roof structural system. For the chosen element, we analyse two variations, first one for reinforced concrete and the second one for prestressed concrete element. The beam is 24.7 m in length and its height varies from 1.25 meter at the bearings to 1.5 m in the middle. The calculations were made accordingly to the requirements of Eurocode DIN EN 1992-1-1:2010. In the first part of the thesis load, load combinations and structural analysis was made. We used the results to dimension and prove all of the requirements for serviceability and ultimate limit state. Reinforcement was designed for both beams for their shear and bending resistance. Control for torsion carrying capacity was made due to their unsymmetrical cross section. For the prestressed beam the rebar was designed for the states of transport and mounting. Necessary tension forces in the cables were calculated for the prestressed beam. Loses of its tension were determined. Vertical displacements of the beams were checked for uncracked and cracked cross sections. Positive effects of prestressing were also included. Reinforcement drawings are shown at the end of the thesis.
Sekundarne ključne besede: graduation thesis;prestressing;reinforced concrete beam;load analysis;loadbearing capacity;vertical strain;
Vrsta datoteke: application/pdf
Vrsta dela (COBISS): Diplomsko delo
Komentar na gradivo: Univ. v Ljubljani, Fak. za gradbeništvo in geodezijo
Strani: XII, 107 str.
ID: 9176137