Št. zadetkov: 11
Diplomsko delo
Oznake:
polžaste dvojice;ozobljeni ležaji;pogon sledilnika sonca;
V diplomskem delu je predstavljeno dimenzioniranje polžnega gonila za pogon sledilnika sonca. V uvodnem delu je predstavljen problem z materialom polžnika in zastavljeni so cilji diplomskega dela. Sledita dve poglavji o teoretičnih osnovah polžnih dvojic. Najprej so predstavljene določilne veličine ...
Leto:
2011
Vir:
Fakulteta za strojništvo (UM FS)
Doktorska disertacija
Oznake:
metalurgija prahov;utrujanje;upogibna trdnost;sintrani zobniki;
Metalurgija prahov je že dodobra uveljavljen proizvodni proces v industrijah z velikoserijsko proizvodnjo. V avtomobilski industriji so tako izdelani npr. različni manjši nosilci kompleksnih oblik, zobniki oljnih črpalk in njihova ohišja. Napredek tehnologije in materialov pa že nakazuje prodor kovi ...
Leto:
2015
Vir:
Fakulteta za elektrotehniko, računalništvo in informatiko (UM FERI)
Strokovni članek
Oznake:
aluminum-based powder;compaction process;Drucker-Prager cap model;numerical simulation;Ecka Alumix 231;
This paper presents the initial material parameters for the Ecka Alumix 231 aluminum-powdered metal required for a successful numerical simulation of a compaction process for sintered components with a proper software package. Experimental work was used to obtain Drucker-Prager-cap (DPC) model mater ...
Leto:
2015
Vir:
Fakulteta za strojništvo (UM FS)
Izvirni znanstveni članek
Oznake:
powder metallurgy;fatigue;S-N curve;
The main focus of this study was to determine how heat treatment affects the dynamic properties of sintered steel. All the specimens were made of the DIN SINT-D30 metal powder, but only half of them were additionally heat treated. Flat specimens were cold pressed and sintered. The second set was add ...
Leto:
2014
Vir:
Fakulteta za naravoslovje in matematiko (UM FNM)
Diplomsko delo
Oznake:
termo-mehansko utrujanje;aluminijeve zlitine;validacija;materialni model;poškodbeni model;metoda končnih elementov;diplomske naloge;
Namen diplomskega dela je dokumentirati potek uporabe programa za validacijo materialnih in poškodbenih modelov za implementacijo le-teh pri numeričnih simulacijah termo-mehanskega utrujanja aluminijevih zlitin. Predstavljeno je teoretično ozadje utrujanja materiala, v katerega uvrščamo velikociklič ...
Leto:
2019
Vir:
Fakulteta za strojništvo (UM FS)
Magistrsko delo
Oznake:
thermo-mechanical fatigue;constitutive material model;damage model;aluminum alloy;cast iron alloy;finite element method;
The basis of the master thesis is an in-depth and comprehensive analysis of the scientific literature on damage models of thermo-mechanical fatigue. The aim of the thesis is to investigate and determine the suitability of damage models for their application in numerical simulations of components sub ...
Leto:
2021
Vir:
Fakulteta za strojništvo (UM FS)
Izvirni znanstveni članek
Oznake:
porozni materiali;malo-ciklično utrujanje;poškodba;metoda končnih elementov;Lotus-type porous material;low-cycle fatigue;damage;finite element analysis;
A computational simulation of low-cycle fatigue behaviour of lotus-type porous material, subjected to biaxial in-phase loading cycles is presented in this paper. Fatigue properties of porous materials are less frequently published in the literature. This paper evaluates computational analyses, where ...
Leto:
2016
Vir:
Fakulteta za strojništvo (UM FS)
Izvirni znanstveni članek
Oznake:
aluminijevi prahovi;sintranje;diferencialna vrstična kalorimetrija s termogravimetrijo;
Al-based alloyed powders, appropriate for the sintering procedure (powder metallurgy, P/M) contain the alloying elements with a high solid solubility in Al, enabling reaction and liquid-phase sintering. They are surface oxidised because of a high affinity of Al to oxygen. Besides, this type of powde ...
Leto:
2014
Vir:
Repozitorij Univerze v Ljubljani (RUL)
Strokovni članek
Oznake:
Fe-based alloy powders;particles;morphology;microstructure;automatic die compaction;sintering;
Fe- and steel-based powder metallurgy (P/M) products, such as steel gears, spurs, locking mechanisms, porous filters, sliding bearings and bushes, as well as other machine parts and structural elements, are mainly produced with the so-called conventional sintering technology. It is the most efficien ...
Leto:
2015
Vir:
Fakulteta za naravoslovje in matematiko (UM FNM)
Strokovni članek
Oznake:
Al-based alloy powders;morphology;microstructure;LM characterisation;SEM/EDS characterisation;
Besides advanced nano steels, polymers and ceramics, recently also light metals, i.e., Al, Mg and Ti based materials, have been recognized as future materials for different kinds of advanced applications. Al and its alloys have an acceptable price, excellent corrosive resistance, good mechanical and ...
Leto:
2014
Vir:
Digitalni repozitorij raziskovalnih organizacij Slovenije