Št. zadetkov: 11
Objavljeni znanstveni prispevek na konferenci
Oznake:
hydrometallurgical extraction of metals;copper;
Chemically pure copper (99.99) prepared in the sample of square cross-section (10 x 10 mm2) and length about 50 mm was extremely plastically deformed with the repeated application of equal channel angular pressing. Equal channel angular pressing was applied as an effective technique for producing bu ...
Leto:
2009
Vir:
Fakulteta za strojništvo (UM FS)
Objavljeni znanstveni prispevek na konferenci
Oznake:
plastically deformed copper;hydrometallurgical extraction of metals;
Pure copper (99.99), prepared in the sample of square cross-section (10 x 10 mm2) and length about 50 mm, was extremely plastically deformed with the repeated application of Equal Channel Angular Pressing (ECAP). ECAP was applied as an effective technique for producing bulk nano-scaled structures. O ...
Leto:
2010
Vir:
Fakulteta za strojništvo (UM FS)
Izvirni znanstveni članek
Oznake:
ellipsometric spectroscopy;atomic force microscopy;copper;amorphisation;
In this paper the results of optical properties investigations on plastically deformed copper are presented. The optical properties of the plastically deformed copper were studied using spectroscopic ellipsometry in the ultraviolet-visible (UV-VIS) range. Chemically pure copper was deformed by apply ...
Leto:
2011
Vir:
Fakulteta za strojništvo (UM FS)
Objavljeni znanstveni prispevek na konferenci
Oznake:
nanocrystalline samples;Raman modes;
Nanocrystalline samples of ZnO(Fe) were synthesized by wet chemical method. Samples were characterized by X-ray diffraction to determine the sample composition and the mean crystalline size. Low frequency Raman modes were measured and assigned according to confined acoustic vibrations of spherical n ...
Leto:
2009
Vir:
Fakulteta za strojništvo (UM FS)
Izvirni znanstveni članek
Oznake:
forming;flow curve;copper alloys;genetic programming;
For the control of the forming process it is necessary to know as precisely as possible the flow curve of the formed material. The paper presents the determination of the equation for the flow curve of cooper alloy (CuCrZr) with artificial intelligence approach. The genetic programming method (GP) w ...
Leto:
2010
Vir:
Fakulteta za strojništvo (UM FS)
Objavljeni znanstveni prispevek na konferenci
Oznake:
semiconductor compounds;PbTe(Ni);
Far-infrared and magnetic properties of Ni doped PbTe (ZNi = 1 £ 1019 at./cm3)single crystal are investigated in a broad range of temperature and magnetic elds. Far-infrared re°ection spectra were analyzed using a tting procedure based on the modi ed plasmon{two phonon interaction model. Together wi ...
Leto:
2009
Vir:
Fakulteta za strojništvo (UM FS)
Objavljeni znanstveni prispevek na konferenci
Oznake:
crystals;Raman scattering;
In this paper, we present room temperature unpolarized Raman scattering spectra of Ni doped PbTe single crystal sample. Crystal of PbTe(Ni) was grown by the Bridgman method. The Ni concentration in the sample used here was 1* 1019 at./cm3. Well resolved peaks appear at about 126, 143, 181, 362 and 7 ...
Leto:
2009
Vir:
Fakulteta za strojništvo (UM FS)
Izvirni znanstveni članek
Oznake:
retention;prefabricated titanium posts;fibre-reinforced composite posts;cements;pull-out testing;
The aim of this study was to assess and compare the mechanical resistance and the retentive force of metal and composite post systems cemented with different types of cements. Three different designs of prefabricated titanium alloy posts were used in the study, i.e., active, passive and combined, as ...
Leto:
2012
Vir:
Fakulteta za strojništvo (UM FS)
Izvirni znanstveni članek
Oznake:
kovine;oksidi;mikroskopija na atomsko silo;Raman spektroskopija;mikrostrukture;metals;oxides;atomic force microscopy;Raman spectroscopy;microstructure;
Our work deals with the problem of producing a complex metal-ceramic composite using the processes of internal oxidation (IO) and severe plastic deformation. For this purpose, Cu-Al alloy with 0.4wt.% of Al was used. IO of sample serves in the first step of the processing as a means for attaining a ...
Leto:
2014
Vir:
Fakulteta za strojništvo (UM FS)
Izvirni znanstveni članek
Oznake:
polymers;mechanical properties;characterization;bruxoguards;polymethyl methacrylate;thermoplastic polycarbonate;
The aim of this study is to investigate the mechanical properties of polymethyl methacrylate (PMMA) and thermoplastic polycarbonate (TPC) materials in order to produce night bruxoguards. For this purpose we used a static tensile test. In the next step the microstructures of PMMA and TPC were observe ...
Leto:
2014
Vir:
Fakulteta za strojništvo (UM FS)