Iskalni niz:
išči po
išči po
išči po
išči po
Vrsta gradiva:
Jezik:
Št. zadetkov: 8
Pomen kriznega komuniciranja v kriznem managementu
Urška Černe Zorko, Drago Dubrovski
Diplomsko delo
Oznake: kriza;krizni management;krizno komuniciranje;načrt komuniciranja;Agrokor;
Leto: 2018 Vir: Fakulteta za management (UP FM)
Potential of woven carbon fiber reinforced polymer composite gears
Damijan Zorko, Zoran Bergant, Borut Černe
Objavljeni znanstveni prispevek na konferenci
Oznake: gears;composites;carbon fibers;
Leto: 2022 Vir: Pravna fakulteta (UL PF)
Comprehensive areal geometric quality characterisation of injection moulded thermoplastic gears
Uroš Urbas, Damijan Zorko, Nikola Vukašinović, Borut Černe
Izvirni znanstveni članek
Oznake: gear metrology;injection moulding;geometrical quality parameters;polymer gears;
Injection moulding is currently the most widely employed production method for polymer gears. Current standardised gear metrology methods, which are based on metal gear inspection procedures, do not provide the key information regarding the geometric stability of injection moulded gears and are insu ...
Leto: 2022 Vir: Fakulteta za strojništvo (UL FS)
Fatigue and wear performance of autoclave-processed and vacuum-infused carbon fibre reinforced polymer gears
Zoran Bergant, Roman Šturm, Damijan Zorko, Borut Černe
Izvirni znanstveni članek
Oznake: carbon fibre reinforced polymer;gears;fatigue;wear;finite element analysis;autoclave;vacuum infusion;
This study focuses on investigating the fatigue and wear behaviour of carbon fibre reinforced polymer (CFRP) gears, which have shown promising potential as lightweight and high-performance alternatives to conventional gears. The gears were fabricated via an autoclave process using an 8-layer composi ...
Leto: 2023 Vir: Fakulteta za strojništvo (UL FS)
ǂThe ǂeffect of center distance error on the service life of polymer gears
Damijan Zorko, Jan Štiglic, Borut Černe, Nikola Vukašinović
Izvirni znanstveni članek
Oznake: gears;polymers;fatigue;service-life;
Gear assembly errors are an important contributor to a premature gearbox failure. This study investigates the effects of center distance deviation on polymer gearbox life. The main focus was on the influence on the stress state of the gear. Reference spur gears (m = 1 mm, z = 20, b = 6 mm) with a st ...
Leto: 2023 Vir: Fakulteta za strojništvo (UL FS)
ǂA ǂmethod for enhanced polymer spur gear inspection based on 3D optical metrology
Uroš Urbas, Damijan Zorko, Borut Černe, Jože Tavčar, Nikola Vukašinović
Izvirni znanstveni članek
Oznake: gears;optical inspection;geometrical parameters;3D scanning;structured light;quality;
Accurately manufactured gears require a reliable, holistic, and fast inspection method. Standardised geometrical parameters enable a consistent and regulated inspection of gears; however, current inspection methods include only a limited set of measurements for gears at specific locations. Therefore ...
Leto: 2021 Vir: Fakulteta za strojništvo (UL FS)
Experimental and numerical analysis of laminated carbon fibre-reinforced polymer gears with implicit model for coefficient-of-friction evaluation
Borut Černe, Zoran Bergant, Roman Šturm, Jože Tavčar, Damijan Zorko
Izvirni znanstveni članek
Oznake: carbon fibre;thermomechanical analysis;finite element method;mechanical testing;composites;autoclave;
Laminated composites have so far received little attention as a potential material for gear drive applications. In the presented study, the thermomechanical performance of a newly developed type of epoxy impregnated, autoclave-cured carbon fibre-reinforced polymer gear-running in pair with a steel p ...
Leto: 2022 Vir: Fakulteta za strojništvo (UL FS)
Agile development of polymer power transmission systems for e-mobility
Ivan Demšar, Borut Černe, Jože Tavčar, Nikola Vukašinović, Damijan Zorko
Izvirni znanstveni članek
Oznake: agile development;design;e-bikes drive;transmissions;polymer gears;
The market for electric bicycles has grown extremely and developed rapidly in recent years. To enter such a market with a new product, the development process has to be fast, and throughout the process, feedback from future potential customer(s) should be sought in order to achieve the best possible ...
Leto: 2023 Vir: Fakulteta za strojništvo (UL FS)
Št. zadetkov: 8
Ključne besede:
Leto izdaje:
Avtorji:
Repozitorij:
Tipologija:
Jezik: