Novel composite films based on cellulose reinforced with chitosan and polyvinyl alcohol
effect on mechanical properties and water vapour permeability
Abstract
Novel composite films were prepared by dissolving microcrystalline cellulose (3–5% w/w) in NaOH/urea solution, followed by coagulation in acetic acid solution. The regenerated cellulose films were immersed in chitosan-polyvinyl alcohol solutions at concentrations of 0–1% w/w and 0–4% w/w, respectively. Tensile strength, percentage of elongation at break, Young's modulus and water vapour permeability were measured to assess the effect of each compound on the mechanical and barrier properties. Polynomial models were obtained to evaluate the effect of the formulation on the measured properties. The microstructure was analysed by scanning electron microscopy. Results showed tensile strength values in the range 27.75–78.48 MPa, similar to usual synthetic polymer films. Percentage of elongation at break ranged from 0.98 to 12.82%, increasing when polyvinyl alcohol and chitosan increased. Young's modulus ranged from 2727.04 to 4217.25 MPa, showing higher values than pure chitosan and polyvinyl alcohol films. The highest value was reached combining cellulose and polyvinyl alcohol without chitosan. The water vapour permeability (1.78·10−11-4.24·10−11 g/m s Pa) showed 2 orders of magnitude higher than that of synthetic polymers, but lower than pure chitosan and polyvinyl alcohol films. Results showed that it is feasible to obtain cellulose-chitosan-polyvinyl alcohol composite films with improved mechanical properties and water vapour permeability.
Keywords
regenerated cellulose;tensile strength;elongation at break;Young's modulus;water vapour permeability;
Data
| Language: | English |
|---|---|
| Year of publishing: | 2018 |
| Typology: | 1.01 - Original Scientific Article |
| Organization: | UNG - University of Nova Gorica |
| UDC: | 54 |
| COBISS: |
42615811
|
| ISSN: | 0142-9418 |
| Views: | 1707 |
| Downloads: | 0 |
| Average score: | 0 (0 votes) |
| Metadata: |
|
Other data
| URN: | URN:SI:UNG |
|---|---|
| Type (COBISS): | Not categorized |
| Pages: | str. 536-544 |
| Issue: | ǂVol. ǂ69 |
| Chronology: | Aug. 2018 |
| DOI: | 10.1016/j.polymertesting.2018.06.016 |
| ID: | 12256790 |
Recommended works:
Novel composite films based on cellulose reinforced with chitosan and polyvinyl alcohol
2018,
effect on mechanical properties and water vapour permeability
Novel composite films from regenerated cellulose-glycerol-polyvinyl alcohol
2019,
mechanical and barrier properties
Characterization of mechanical and barrier properties of bacterial cellulose, glycerol and polyvinyl alcohol (PVOH) composite films with eco-friendly UV-protective properties
2020,
no subtitle data available
Composite films of regenerate cellulose with chitosan and polyvinyl alcohol
2018,
evaluation of water adsorption, mechanical and optical properties
Polysaccharide-based films and coatings for food packaging
2017,
ǂa ǂreview