diplomsko delo
Larisa Vrtovec (Avtor), Franc Rojko (Recenzent), Peter Bohinc (Mentor)

Povzetek

Uvod: Obicajno so kovinske baze po klasicni metodi izdelane s pripravo in podvajanjem mavcnega modela, modeliranjem baze iz voska ter njenim vlaganjem v vložno maso. V zadnjih letih pa se v zobni protetiki, tudi pri izdelavi kovinskih baz, uporablja vse vec tehnologij CAD/CAM. Digitalni nacin dela postaja vse bolj priljubljen in uporaben. Združljiv je tudi s klasicnimi postopki izdelave kovinskih baz. Namen: Namen diplomskega dela je predstaviti casovno razliko med oblikovanjem kovinske baze s klasicno metodo dela in oblikovanjem kovinske baze z digitalno tehnologijo. Metode dela: Pri uvodnem delu diplomskega dela smo uporabili deskriptivno metodo dela. Prakticni del diplomskega dela smo izvedli v zobnem laboratoriju. Oblikovali smo deset kovinskih baz z digitalno metodo dela in deset baz s klasicno metodo dela ter izdelavi casovno primerjali. Rezultati: V rezultatih predstavljamo postopka digitalnega in klasicnega oblikovanja kovinske baze, predstavitev smo podprli s slikovnim gradivom. Predstavljamo tudi casovne meritve oblikovanja in razlike, ki so se pojavile med postopkoma dela. Tudi ta del pridobljenih rezultatov smo podprli s slikovnim gradivom. Razprava in zakljucek: V današnjem casu se v vsakdanjo prakso vkljucuje vse vec sodobnih tehnologij. Tudi razvoj tehnologije CAD/CAM za uporabo v snemni protetiki je vse mocnejši. Digitalna izdelava kovinskih baz se ponaša s številnimi prednostmi, in sicer z natancnostjo nacrtovanja, izboljšano kakovostjo ter skrajšanim casom izdelave. Najnatancnejšo izdelavo kovinske baze dosežemo s povsem digitalnim pristopom, sledi izdelava s klasicnim pristopom, najmanj natancna pa je kombinacija obeh.

Ključne besede

diplomska dela;laboratorijska zobna protetika;CAD/CAM;kovinska baza;snemne delne proteze;

Podatki

Jezik: Slovenski jezik
Leto izida:
Tipologija: 2.11 - Diplomsko delo
Organizacija: UL ZF - Zdravstvena fakulteta
Založnik: [L. Vrtovec]
UDK: 616.31
COBISS: 161707779 Povezava se bo odprla v novem oknu
Št. ogledov: 58
Št. prenosov: 10
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Angleški jezik
Sekundarni naslov: Time comparison of manual and digital design of metal frameworks
Sekundarni povzetek: Introduction: Usually a classic way to prepare a metal framework is by preparing and duplicating a plaster model, modeling the wax base and investing it in the investment mass. However, in recent years CAD/CAM technologies are more and more used in dental practise, including in the process of making metal frameworks. CAD/CAM technologies are also compatible with classic procedures and manufacturing of metal frameworks. Purpose: Purpose of the diploma work is to present,time difference between the design of metal framework using classical work method and the design using digital work method. Methods: The theoretical part of the thesis was written using the descriptive method. The practical part of the thesis was made in dental laboratory. We designed ten metal bases with digital work method and ten with classic work method. In the end we compared the time difference between the two tehniques Results: In results, we present the process of digital and classical designing of metal base. The process is supported with graphical material. We also present the time measurments of the design and the differences that appeared between one and the other. This part was also supported with graphical material. Discussion and conclusion: Nowadays, more and more modern technologies are included in everyday practice. The development of CAD/CAM in the field of removable prosthetics is also incresing. Digital production of metal frameworks presents itself with many advantages. Some of these advantages are in accuracy of planning, improved quality and in reduced producition time. The best production of metal framework is achived with complete digital approach, the second best is achived with classic aprroach in production and in the third place is achived with combination of the two.
Sekundarne ključne besede: diploma theses;laboratory dental prosthetics;CAD/CAM;metal framework;partial dentures;
Vrsta dela (COBISS): Diplomsko delo/naloga
Študijski program: 0
Konec prepovedi (OpenAIRE): 1970-01-01
Komentar na gradivo: Univ. v Ljubljani, Zdravstvena fak., Oddelek za protetiko
Strani: 44 str., [2] str. pril.
ID: 19782095