Nina Gartner (Avtor), Tadeja Kosec Mikić (Avtor), Stéphane Poyet (Avtor), Andraž Legat (Avtor)

Povzetek

Alkali‐activated materials (AAMs) are considered a promising alternative to materials made from ordinary Portland cement (OPC). Other than considering the durability of the material itself, the use of AAMs for reinforced concrete elements also raises the question of steel corrosion processes in these materials, which are still relatively unknown. Three different alkali‐activated mortars were prepared for this study, based on either fly ash, slag, or metakaolin. Pore solutions were then extracted from each mortar and chemically analyzed. Electrochemical techniques were used to study the corrosion of steel in synthetic pore solutions containing varying concentrations of chlorides. In parallel, the same corrosion tests were performed in a generic pore solution representing OPC mortar. It was shown that the chemical composition differed in each pore solution tested, thus affecting the corrosion properties of the steel. The addition of chloride also had a varying effect on the corrosion properties of the steel in each type of pore solution tested. This study provided a basic overview of the corrosion behavior and mechanisms of the various AAM environments in comparison to that of OPC.

Ključne besede

alkali-aktivated materials;corrosion;electrochemical corrosion techniques;extracted pore solution;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: ZAG - Zavod za gradbeništvo Slovenije
Založnik: Wiley VCH
UDK: 544.5/.6
COBISS: 151389443 Povezava se bo odprla v novem oknu
ISSN: 1521-4176
Št. ogledov: 11
Št. prenosov: 2
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Slovenski jezik
Sekundarne ključne besede: alkalijsko aktivirani materiali;korozija;elektrokemijske korozijske tehnike;iztisnjena porna voda;
Konec prepovedi (OpenAIRE): 2024-04-28
Komentar vira: Nasl. z nasl. zaslona; Opis vira z dne 9. 5. 2023;
Strani: str. 1009-1021
Letnik: ǂVol. ǂ74
Zvezek: ǂiss. ǂ7
Čas izdaje: Jul. 2023
DOI: 10.1002/maco.202313729
ID: 21128642
Priporočena dela:
, ni podatka o podnaslovu
, ni podatka o podnaslovu
, mix design and reproducibility of compressive strength of alkaliactivated concretes