Vpliv vrste polimerne disperzije na mehanske in fizikalne lastnosti sanacijskih malt in betonov

Povzetek

Ključne besede

Podatki

Jezik:	Slovenski jezik
Leto izida:	2007
Izvor:	Ljubljana
Tipologija:	2.11 - Diplomsko delo
Organizacija:	UL FGG - Fakulteta za gradbeništvo in geodezijo
Založnik:	[D. Golob]
UDK:	691.32+691.33+691.53(043.2)
COBISS:	3856993
Št. ogledov:	2457
Št. prenosov:	751
Ocena:	0 (0 glasov)
Metapodatki:

Ostali podatki

Sekundarni jezik:	Angleški jezik
Sekundarni naslov:	The influence of polymer latex type on mechanical and physical properties of mortans and concretes used for repair
Sekundarni povzetek:	The diploma thesis deals with the influence of three different types of polymer latexes on mechanical and physical properties of materials with polymer-cement binder at different polymer/cement ratios (0,05, 0,075 and 0,10). Materials with polymer-cement binder were made using two different aggregates and two different ordinary cements. Due to big number of variables the tests were carried out on mortars. Firstly 24 different mixtures of mortars were defined on which different tests were carried out. On fresh mortar mixes flow value, air content and density were determined and on hardened mortar mixes first compressive and flexural tests were carried out on specimens cured in two different ways (wet and dry curing). After that shrinkage and water absorption tests were carried out on hardened mortars and at the end we checked the influence of freezing/thawing cycles on the flexural and compressive strength of the specimen.
Sekundarne ključne besede:	polymer;polymer latex;compressive strength;flexural strength;
Vrsta datoteke:	application/pdf
Vrsta dela (COBISS):	Diplomsko delo
Komentar na gradivo:	Univ. v Ljubljani, Fak. za gradbeništvo in geodezijo
Strani:	XI, 71 f.
Vrsta dela (ePrints):	thesis
Naslov (ePrints):	Vpliv vrste polimerne disperzije na mehanske in fizikalne lastnosti sanacijskih malt in betonov
Ključne besede (ePrints):	gradbeništvo;diplomska dela;UNI;polimer;polimerna disperzija;tlačna trdnost;upogibna trdnost;zmrzovanje/tajanje;krčenje;vpijanje vode;malta;
Ključne besede (ePrints, sekundarni jezik):	polymer;polymer latex;compressive strength;flexural strength;
Ključne besede (ePrints, sekundarni jezik):	polymer;polymer latex;compressive strength;flexural strength;
ID:	8308081