Kompatibilnost in sprijemna trdnost s polimeri modoficiranega betona in podlage

Povzetek

Ključne besede

Podatki

Jezik:	Slovenski jezik
Leto izida:	2009
Izvor:	Ljubljana
Tipologija:	2.11 - Diplomsko delo
Organizacija:	UL FGG - Fakulteta za gradbeništvo in geodezijo
Založnik:	[M. Božič]
UDK:	691.32(043.2)
COBISS:	4649825
Št. ogledov:	3395
Št. prenosov:	485
Ocena:	0 (0 glasov)
Metapodatki:

Ostali podatki

Sekundarni jezik:	Angleški jezik
Sekundarni naslov:	Compatibility and bond strenght between polymer modified concrete and base concrete
Sekundarni povzetek:	The diploma work deals with the influence of two different polymer latexes on mechanical and physichal properties of concrete with polymer-cement binder at different polymer-cement ratios (0,075 and 0,10). Concretes with polymer-cement binder were made using the same cement and aggregate. Preliminary tests were made on mortars, we made them on concrete. On fresh concrete mixes slump and slump – flow value, air content and density were determined, on hardened concrete compressive strength, flexural and splitting strength, water apsorption, static and dynamic moduls of elasticity and bond strength between repair concrete and base concrete were tested.
Sekundarne ključne besede:	concrete;polymer;polymer latex;consistency;compressive strength;flexuaral strength;dividable strength;elasticity modul;bond strength;water apsorption;
Vrsta datoteke:	application/pdf
Vrsta dela (COBISS):	Diplomsko delo
Komentar na gradivo:	Univ. v Ljubljani, Fak. za gradbeništvo in geodezijo
Strani:	XII, 71 str.
Vrsta dela (ePrints):	thesis
Naslov (ePrints):	Compatibility and bond strength between polymer modified concrete and base concrete
Ključne besede (ePrints):	beton;polimer;polimerna disperzija;konsistenca;tlačna trdnost;upogibna trdnost;cepilna trdnost;modul elastičnosti;sprijemna trdnost;vpijanje vode.
Ključne besede (ePrints, sekundarni jezik):	concrete;polymer;polymer latex;consistency;compressive srength;flexural strength;dividable strength;elasticity modul;bond strength;water apsorption.
Povzetek (ePrints):	V okviru diplomske naloge smo študirali vpliv dveh različnih polimernih disperzij na mehanske in fizikalne lastnosti betonov s polimerno-cementnim vezivom pri različnih polimerno-cementnih razmerjih (0,075 in 0,10). Betoni s polimerno-cementnim vezivom so bili izdelani z isto vrsto cementa in agregata. Predhodne preiskave so bile opravljene na maltah, mi pa smo jih opravili na betonu. Na svežih mešanicah smo določali konsistenco s posedom in razlezom s posedom, poroznost in prostorninsko maso, na strjenih betonih pa njihovo tlačno trdnost, upogibno in cepilno trdnost, vpijanje vode, statični in dinamični modul elastičnosti ter sprijemno trdnost med sanacijskim betonom in podlago.
Povzetek (ePrints, sekundarni jezik):	The diploma work deals with the influence of two different polymer latexes on mechanical and physichal properties of concrete with polymer-cement binder at different polymer-cement ratios (0,075 and 0,10). Concretes with polymer-cement binder were made using the same cement and aggregate. Preliminary tests were made on mortars, we made them on concrete. On fresh concrete mixes slump and slump – flow value, air content and density were determined, on hardened concrete compressive strength, flexural and splitting strength, water apsorption, static and dynamic moduls of elasticity and bond strength between repair concrete and base concrete were tested.
Ključne besede (ePrints, sekundarni jezik):	concrete;polymer;polymer latex;consistency;compressive srength;flexural strength;dividable strength;elasticity modul;bond strength;water apsorption.
ID:	8309199