Št. zadetkov: 11
Izvirni znanstveni članek
Oznake:
EPD;LCA;nizkoogljična bio-kemija;trajnostni razvoj;LCD;low carbon bio-economy;PCR;sustainability;
Next steps in developing thermally modified timber to meet requirements of European low carbon economy
Leto:
2015
Vir:
Univerza na Primorskem (UP)
Objavljeni znanstveni prispevek na konferenci
Oznake:
okoljske deklaracije proizvodov;nizko ogljična bioekonomija;pravila kategorij proizvodov;trajnostni razvoj;environmental product declaration;low-carbon bioeconomy;product category rules;sustainability;
Thermally modified timber
Leto:
2016
Vir:
Univerza na Primorskem (UP)
Izvirni znanstveni članek
Oznake:
bending;densification;shaping;thermal treatment;thermo- hydro- mechanical treatment;thermo-hydro treatment;wood products;
Compressed and moulded wood from processing to products - a review
Leto:
2015
Vir:
Univerza na Primorskem (UP)
Pregledni znanstveni članek
Oznake:
chemical treatments;thermo-hydro-mechanical;LCA;acetylation;furfurylation;resin impregnation;environmental impacts;densification;
Wood modification technologies
Leto:
2017
Vir:
Univerza na Primorskem (UP)
Objavljeni povzetek znanstvenega prispevka na konferenci
Oznake:
heat-treatment;resin impregnation;Scots pine;
Leto:
2021
Vir:
Univerza na Primorskem (UP)
Izvirni znanstveni članek
Oznake:
stol;križna vez;upogibni moment;chair;mortise-and-tenant joint;bending moment;joint angle;tenon length;
This paper investigated the bending moment of chair base joints. The ultimate bending moments (maximum moment), calculated on the base of the measured maximum applied loads (maximum force), were compared for the front leg and rear leg joints of a chair base. The joints had different angles between t ...
Leto:
2023
Vir:
Biotehniška fakulteta (UL BF)
Objavljeni znanstveni prispevek na konferenci
Oznake:
inženirski izdelki iz lesa;arhitektura;Makedonija;engineered wood products;architecture;Macedonia;
Wood, abundantly available locally since ancient times, played a pivotal role in Macedonian
architecture. Functioning as a structural and decorative material, it enhanced both the exterior and the
interior aesthetics of buildings. Despite its wide usage in the past, wood is nowadays mostly used in t ...
Leto:
2024
Vir:
Biotehniška fakulteta (UL BF)
Izvirni znanstveni članek
Oznake:
DCLT;underutilised species;hardwood;dowel;
Europe is experiencing a shift in timber resource availability, with a decline in softwoods and an increase in hardwoods, creating a need to explore the utilisation of hardwoods, particularly in construction, where softwoods have traditionally been predominant. This research aimed to assess the pote ...
Leto:
2025
Vir:
Fakulteta za matematiko, naravoslovje in informacijske tehnologije Koper (UP FAMNIT)
Izvirni znanstveni članek
Oznake:
adhesion;citric acid;esterification;ionic liquids;wood composite;
Particleboards with different combinations of the adhesive material imidazole, citric acid, and sorbitol were produced. Softwood sawdust from a Swedish sawmill was mixed with an aqueous solution of the chemicals and then dried to 0% moisture content prior to pressing. The boards were pressed to a ta ...
Leto:
2023
Vir:
Biotehniška fakulteta (UL BF)
Kratki znanstveni prispevek
Oznake:
densification;wood;fire safety;
Thermo-hydro-mechanical (THM) densification is a well-known wood modification procedure for improving the mechanical properties of low-density wood species, but its performance at elevated temperatures is not well understood. The objective of this study was to determine the bending behaviour of dens ...
Leto:
2024
Vir:
Zavod za gradbeništvo Slovenije (ZAG)