Iskalni niz:
išči po
išči po
išči po
išči po
Vrsta gradiva:
Jezik:
Št. zadetkov: 6
Influence of Gluing Technology on Physical and Mechanical Properties of Laminated Veneer Lumber
Murčo Obućina, Goran Turk, Ejub Džaferović, Jože Resnik
Izvirni znanstveni članek
Oznake: lesena vezana plošča;vroče lepljenje;visokofrekvenčno lepljenje;fizikalne lastnosti;mehanske lastnosti;laminated veneer lumber;hot glueing;high frequency gluing;physical properties;mechanical properties;
This paper presents the analysis of the infl uence of conventional hot (CH) and high frequency (HF) gluing on relevant physical and mechanical properties of Laminated Veneer Lumber (LVL) made from beech peeled veneer with the thickness of 2.1 mm. Student’s T-test was applied to determine the signifi ...
Leto: 2013 Vir: Fakulteta za gradbeništvo in geodezijo (UL FGG)
Numerical and experimental investigations of polymer viscoelastic materials obtained by 3D printing
Jusuf Ibrulj, Ejub Džaferović, Murčo Obućina, Manja Kitek Kuzman
Izvirni znanstveni članek
Oznake: modul relaksacije;modul lezenja;viskoelastičnost;numerične eksperimentalne metode;Pronyeva vrsta;relaxation modulus;creep modulus;viscoelasticity;numerical experimental method;Prony series;
The aim of this research is to determine the relaxation and creep modulus of 3D printed materials, and the numerical research is based on the finite volume method. The basic material for determining these characteristics is ABS (acrylonitrile butadiene styrene) plastic as one of the most widely used ...
Leto: 2021 Vir: Biotehniška fakulteta (UL BF)
Bending moment of mortise-and-tenon joints in a crossed chair base
Seid Hajdarević, Murčo Obućina, Manja Kitek Kuzman, Dick Sandberg
Izvirni znanstveni članek
Oznake: stol;križna vez;upogibni moment;chair;mortise-and-tenant joint;bending moment;joint angle;tenon length;
This paper investigated the bending moment of chair base joints. The ultimate bending moments (maximum moment), calculated on the base of the measured maximum applied loads (maximum force), were compared for the front leg and rear leg joints of a chair base. The joints had different angles between t ...
Leto: 2023 Vir: Biotehniška fakulteta (UL BF)
Strength and stiffness of 3D-printed connectors compared with the wooden mortise and tenon joints for chairs
Seid Hajdarević, Manja Kitek Kuzman, Murčo Obućina, Srečko Vratuša, Tomaž Kušar, Mirko Kariž
Izvirni znanstveni članek
Oznake: les;čepne vezi;3D tiskanje;wood;mortise-and-tenon joint;3D printing;strength and stiffness;
In this study, 3D-printed connectors to replace the typical L-shaped joints in the construction of a chair were developed, tested and numerically analysed. Different connectors were designed and manufactured with a fused deposition modelling (FDM) 3D printer using acrylonitrile butadiene styrene (AB ...
Leto: 2022 Vir: Biotehniška fakulteta (UL BF)
Effects of cutting parameters and grain direction on surface quality of three wood species obtained by CNC milling
Alen Ibrišević, Murčo Obućina, Seid Hajdarević, Goran Mihulja, Manja Kitek Kuzman, Ibrahim Busuladzić
Izvirni znanstveni članek
Oznake: les;CNC rezkanje;hitrost pomika;wood;CNC milling;surface roughness;radial, tangential, grain direction;feed rates;
Computer Numerical Control (CNC) machines are increasingly popular in the production of furniture and wood products, because they combine high processing quality with short production time. The effective use of CNC machines depends on the processing parameters, which also affects the quality of the ...
Leto: 2023 Vir: Biotehniška fakulteta (UL BF)
Impact of COVID-19 on wood-based products industry
Manja Kitek Kuzman, Leon Oblak, Branko Glavonjić, Andreja Pirc, Murčo Obućina, Eva Haviarova, Petra Grošelj
Izvirni znanstveni članek
Oznake: pandemija;lesna industrija;pandemic;wood-products industry;
The COVID-19 pandemic has significantly impacted the forest-products industry locally and globally, including the availability of raw materials, supply chain, production, and product sales. Therefore, it was essential to study the effect of COVID-19 in Central and Southeast European countries, inclu ...
Leto: 2022 Vir: Biotehniška fakulteta (UL BF)
Št. zadetkov: 6
Ključne besede:
Leto izdaje:
Avtorji:
Repozitorij:
Tipologija:
Jezik: