Iskalni niz:
išči po
išči po
išči po
išči po
Vrsta gradiva:
Jezik:
Št. zadetkov: 5
Influence of anode immersion speed on current and power in plasma electrolytic polishing
Joško Valentinčič, Henning Zeidler, Toni Böttger, Marko Jerman
Izvirni znanstveni članek
Oznake: plazemsko elektrolitsko poliranje;parno-plinska ovojnica;hitrost potapljanja;vršni tok;povprečni tok;inicializacija procesa;plasma electrolytic polishing;vapour–gaseous envelope;immersion speed;peak current;average power;process initialisation;
Plasma electrolytic polishing (PeP) is mainly used to improve the surface quality and thus the performance of electrically conductive parts. It is usually used as an anodic process, i.e., the workpiece is positively charged. However, the process is susceptible to high current peaks during the format ...
Leto: 2024 Vir: Fakulteta za strojništvo (UL FS)
Advancements in surface finish for additive manufacturing of metal parts
Joško Valentinčič, Jithinraj Edaklavan Koroth, Henning Zeidler
Izvirni znanstveni članek
Oznake: aditivna proizvodnja;plazemsko elektrolitsko poliranje;hrapavost površine;naknadna obdelava;additive manufacturing;plasma electrolytic polishing;surface roughness;post-processing;
Additive manufacturing (AM) has become a popular technique for producing metal parts due to its design flexibility, shorter lead time and lower material consumption. However, the higher surface roughness of printed parts limits their direct industrial use. Over the years, many post-processing techni ...
Leto: 2024 Vir: Fakulteta za strojništvo (UL FS)
Preliminary investigation on plasma electrolytic polishing of microfluidic platform produced by selective laser melting
Izidor Sabotin, Marko Jerman, Andrej Lebar, Joško Valentinčič, Toni Böttger, Lisa Kühnel, Henning Zeidler
Objavljeni znanstveni prispevek na konferenci
Oznake: selektivno lasersko pretaljevanje;plazemsko elektrolitsko poliranje;izdelovalna veriga;mikrofluidika;aditivne tehnologije;selective laser melting;plasma electrolytic polishing;process chain;microfluidics;additive technology;
The inherent issue of additively manufactured metallic parts is in their high surface roughness which hinders technology’s applicability for microproduct production. Usually, post-processing is required. Plasma electrolytic Polishing (PeP) is a promising technology which could tackle aforementioned ...
Leto: 2021 Vir: Fakulteta za strojništvo (UL FS)
Effects of plasma electrolytic polishing on SLM printed microfluidic platform
Izidor Sabotin, Marko Jerman, Andrej Lebar, Joško Valentinčič, Toni Böttger, Lisa Kühnel, Henning Zeidler
Objavljeni znanstveni prispevek na konferenci
Oznake: selective laser melting;plasma electrolytic polishing;microfluidics;additive manufacturing;
Leto: 2021 Vir: Fakulteta za strojništvo (UL FS)
Plasma electrolytic polishing of nitinol
Kristina Navickaite, Lucia Ianniciello, Jaka Tušek, Kurt Engelbrecht, Christian Robert Haffenden Bahl, Michael Penzel, Klaus Nestler, Falko Böttger-Hiller, Henning Zeidler
Izvirni znanstveni članek
Oznake: plazemsko elektrolitsko poliranje;materiali z oblikovnim spominom;Ni-Ti;mehanska stabilnost;elastokalorični učinek;medicinske aplikacije;plasma electrolytic polishing;shape memory alloys;nitinol;mechanical stability;elastocalorics;medical applications;
A novel, environmentally friendly, fast, and flexible polishing process for Nitinol parts is presented in this study. Nitinol samples with both superelastic and shape memory properties at room temperature were investigated. The chemical contamination and surface roughness of superelastic Nitinol pla ...
Leto: 2021 Vir: Fakulteta za strojništvo (UL FS)
Št. zadetkov: 5
Ključne besede:
Leto izdaje:
Avtorji:
Repozitorij:
Tipologija:
Jezik: