Iskalni niz:
išči po
išči po
išči po
išči po
Vrsta gradiva:
Jezik:
Št. zadetkov: 6
Two step process chain for micromixer tool insert production
Izidor Sabotin, Joško Valentinčič
Objavljeni znanstveni prispevek na konferenci
Oznake: abrazivni vodni curek;elektroerozija;vlivanje PDMS;izdelovalna veriga;mikromešalniki;laboratoriji na čipu;AWJ;EDM;casting PDMS;process chain;micromixers;labs on a chip;
Leto: 2022 Vir: Fakulteta za strojništvo (UL FS)
Technical model of micro electrical discharge machining (EDM) milling suitable for bottom grooved micromixer design optimization
Izidor Sabotin, Gianluca Tristo, Joško Valentinčič
Izvirni znanstveni članek
Oznake: mikroizdelava;mikro elektroerozijsko dolbenje;empirično modeliranje;mikromešalnik;dizajn za izdelavo;numerična analiza dinamike tekočin;micromachining;micro EDM milling;empirical modelling;micromixer;design for manufacturing;computational fluid dynamics;
In this paper, development of a technical model of micro Electrical Discharge Machining in milling configuration (EDM milling) is presented. The input to the model is a parametrically presented feature geometry and the output is a feature machining time. To model key factors influencing feature mach ...
Leto: 2020 Vir: Fakulteta za strojništvo (UL FS)
Ice jet technology
Marko Jerman, Andrej Lebar, Izidor Sabotin, Pavel Drešar, Joško Valentinčič
Izvirni znanstveni članek
Oznake: IAWJ machining;icejet;ice abrasive;cryogenic gas;ice particles;
Ice jet technology
Leto: 2018 Vir: Fakulteta za strojništvo (UL FS)
Characterization of a custom-made digital light processing stereolithographic printer based on a slanted groove micromixer geometry
Joško Valentinčič, Miha Prijatelj, Marko Jerman, Andrej Lebar, Izidor Sabotin
Izvirni znanstveni članek
Oznake: DLP stereolithography;3D printers;characterizations;micromixers;
A custom-made stereolithographic printer using a digital light processing optical (DLP) system based on a digital micromirror device (DMD) was characterized. Several sizes of slanted grooved micromixers (SGM) were produced and typical dimensions were measured and compared to nominal values. The resu ...
Leto: 2020 Vir: Fakulteta za strojništvo (UL FS)
Preliminary investigation on plasma electrolytic polishing of microfluidic platform produced by selective laser melting
Izidor Sabotin, Marko Jerman, Andrej Lebar, Joško Valentinčič, Toni Böttger, Lisa Kühnel, Henning Zeidler
Objavljeni znanstveni prispevek na konferenci
Oznake: selektivno lasersko pretaljevanje;plazemsko elektrolitsko poliranje;izdelovalna veriga;mikrofluidika;aditivne tehnologije;selective laser melting;plasma electrolytic polishing;process chain;microfluidics;additive technology;
The inherent issue of additively manufactured metallic parts is in their high surface roughness which hinders technology’s applicability for microproduct production. Usually, post-processing is required. Plasma electrolytic Polishing (PeP) is a promising technology which could tackle aforementioned ...
Leto: 2021 Vir: Fakulteta za strojništvo (UL FS)
Effects of plasma electrolytic polishing on SLM printed microfluidic platform
Izidor Sabotin, Marko Jerman, Andrej Lebar, Joško Valentinčič, Toni Böttger, Lisa Kühnel, Henning Zeidler
Objavljeni znanstveni prispevek na konferenci
Oznake: selective laser melting;plasma electrolytic polishing;microfluidics;additive manufacturing;
Leto: 2021 Vir: Fakulteta za strojništvo (UL FS)
Št. zadetkov: 6
Ključne besede:
Leto izdaje:
Avtorji:
Repozitorij:
Tipologija:
Jezik: