Št. zadetkov: 13
Objavljeni povzetek znanstvenega prispevka na konferenci (vabljeno predavanje)
Oznake:
stomatologija;materiali;
Trends in micrustructural analyses of dental alloys before and after biocompatibility testing
Leto:
2012
Vir:
Fakulteta za strojništvo (UM FS)
Doktorska disertacija
Oznake:
zlato;zlitine zlato-lantan;notranja oksidacija;biokompatibilnost;mikrolegirano disperzijsko utrjeno zlato;medicinski implantati;doktorske disertacije;
V doktorski disertaciji je obravnavana problematike izdelave mikrolegiranega disperzijsko utrjenega zlata z disperzijo oksidov (La2O3), redko zemeljskega elementa (La) s procesom notranje oksidacije ter študija biokompatibilnosti materiala.. V prvem delu raziskav smo izdelali zlitino Au – 0,5 ut.% ...
Leto:
2016
Vir:
Fakulteta za strojništvo (UM FS)
Pregledni znanstveni članek
Oznake:
zlato;fizikalno-kemijske lastnosti;nanodelci;uporaba;gold;physical-chemical properties;nano-particles;applications;
This paper deals with gold, which is described as a chemical element. Special attention is paid to its physical-chemical properties and, furthermore, where or in what form it can be found in nature. We discuss the role it has played through history and we inform how gold has been developed to the le ...
Leto:
2012
Vir:
Fakulteta za strojništvo (UM FS)
Pregledni znanstveni članek
Oznake:
metal-ceramic bonding;brazing;soldering;dentistry;jewellery;
Metal-ceramic fusing has been the essential step in obtaining materials that benefit from both ceramic and metal constituents, i.e. where the combined properties of metal and ceramic layers are desirable. When considering fusing methods, soldering and active metal brazing are the most effective. The ...
Leto:
2010
Vir:
Fakulteta za strojništvo (UM FS)
Izvirni znanstveni članek
Oznake:
Co–Cr dentalne zlitine;3D tiskanje;litje;mikrostruktura;lasersko pretaljevanje;lasersko sintranje;mehanske lastnosti;karakterizacija;Co–Cr dental alloys;3D printing;laser melting and sintering;casting;microstructure;mechanical properties;characterization;
Since additive technologies in dentistry are gradually replacing metal casting technology, it is necessary to evaluate new dental constructions intended for the development of removable partial denture frameworks. The aim of this research was to evaluate the microstructure and mechanical properties ...
Leto:
2023
Vir:
Fakulteta za strojništvo (UM FS)
Izvirni znanstveni članek
Oznake:
unilateral complex partial denture;SD snap-in-latch attachment;physiological load;excessive load;dentistry;
Different types of dental restorations are used in the treatment of a unilateral, free-end saddle. A unilateral, complex, partial denture is one of the indications for this case of partial edentulousness. Consequently, the aim of this study was to stress test the unilateral complex partial denture m ...
Leto:
2010
Vir:
Fakulteta za strojništvo (UM FS)
Kratki znanstveni prispevek
Oznake:
rhodium;plating;jewellery;properties;
Modern rhodium plating solutions are based on either sulphate or phosphate. Although in theory there are four possible combinations, in practice only three different rhodium electrolytes are used. These are based on dilutions of rhodium sulphate or phosphate concentrates with added sulphuric or phos ...
Leto:
2013
Vir:
Digitalna knjižnica Univerze v Mariboru (DKUM)
Izvirni znanstveni članek
Oznake:
dental alloy;characterisation;microstructure;properties;
The basis for developing a new dental alloy with high Au content is appropriate chemical composition and manufacturing technology. This new Au dental alloy is based on the ternary system of Au-Pt-Zn with a nominal composition of 88.5Au-8.7Pt-1.5Zn-0.5In-0.4Ir-0.3Rh. The alloy was melted and cast in ...
Leto:
2007
Vir:
Fakulteta za strojništvo (UM FS)
Izvirni znanstveni članek
Oznake:
implantati;titanove zlitine;modifikacija površine;mikrostruktura;implantat;titan alloys;surface modification;microstructure;
The shape and chemical composition, as well as the macro- and microtopography, of an implant surface have been studied widely as the major factors that positively influence implant osseointegration. Titanium and titanium alloys have been used extensively over the past 20 years as biomedical material ...
Leto:
2012
Vir:
Fakulteta za strojništvo (UM FS)
Izvirni znanstveni članek
Oznake:
okluzija;ortodontski sistem;metoda končnih elementov;ortodonske sile;zobje;malocclusion;orthodontic system;finite elements method;orthodontic force;tooth;
This study was addressed to use knowledge about the orthodontic system with numerical simulation of the nite elements method. For the rst time we simulated the stresses on the orthodontic system and, in this manner, calculated the orthodontic force on the tooth. A 3D orthodontic model or orthodontic ...
Leto:
2012
Vir:
Fakulteta za strojništvo (UM FS)