Št. zadetkov: 10
Diplomsko delo
Oznake:
zančno omrežje;anonimni sporočilni sistem;Android;
Anonimni sporočilni sistem na osnovi zančnega omrežja
Leto:
2013
Vir:
Univerza na Primorskem (UP)
Izvirni znanstveni članek
Oznake:
unilateral complex partial denture;SD snap-in-latch attachment;physiological load;excessive load;dentistry;
Different types of dental restorations are used in the treatment of a unilateral, free-end saddle. A unilateral, complex, partial denture is one of the indications for this case of partial edentulousness. Consequently, the aim of this study was to stress test the unilateral complex partial denture m ...
Leto:
2010
Vir:
Fakulteta za strojništvo (UM FS)
Izvirni znanstveni članek
Oznake:
retention;prefabricated titanium posts;fibre-reinforced composite posts;cements;pull-out testing;
The aim of this study was to assess and compare the mechanical resistance and the retentive force of metal and composite post systems cemented with different types of cements. Three different designs of prefabricated titanium alloy posts were used in the study, i.e., active, passive and combined, as ...
Leto:
2012
Vir:
Fakulteta za strojništvo (UM FS)
Pregledni znanstveni članek
Oznake:
metal-ceramic bonding;brazing;soldering;dentistry;jewellery;
Metal-ceramic fusing has been the essential step in obtaining materials that benefit from both ceramic and metal constituents, i.e. where the combined properties of metal and ceramic layers are desirable. When considering fusing methods, soldering and active metal brazing are the most effective. The ...
Leto:
2010
Vir:
Fakulteta za strojništvo (UM FS)
Izvirni znanstveni članek
Oznake:
ceramic-metal bonding;low-temperature;nano-foils;plasma technology;dentistry;jewellery;
This paper describes the development of novel, reactive Al-Au nano-multilayered foils, their possible application in different fields and a discussion of the nano-foils' suitability for dental and jewellery applications. Moreover, this study includes the rapid joining of similar and dissimilar mater ...
Leto:
2009
Vir:
Fakulteta za strojništvo (UM FS)
Izvirni znanstveni članek
Oznake:
implantati;titanove zlitine;modifikacija površine;mikrostruktura;implantat;titan alloys;surface modification;microstructure;
The shape and chemical composition, as well as the macro- and microtopography, of an implant surface have been studied widely as the major factors that positively influence implant osseointegration. Titanium and titanium alloys have been used extensively over the past 20 years as biomedical material ...
Leto:
2012
Vir:
Fakulteta za strojništvo (UM FS)
Izvirni znanstveni članek
Oznake:
Au dental alloy;properties;microstructure;characterization;
Development of a dental alloy with high Au content is based on the ternary system of Au-Pt-Zn with a nominal composition of 86,9Au-9,9Pt-1,5Zn, and about 1,5 wt.% micro-alloying elements (In, Ir, Rh). The results analyses of different heat-treated states showed that the optimal mechanical properties ...
Leto:
2008
Vir:
Digitalna knjižnica Univerze v Mariboru (DKUM)
Izvirni znanstveni članek
Oznake:
composite rest seat;abutment tooth;stress distribution;finite element method;
Placing a composite restoration on abutments for the removable of partial dentures gives favorable aesthetic results with minimal intervention. The objective of this paper is to analyze the stress distribution of a tooth with occlusal rest-seat preparation in the composite and compare it to the biom ...
Leto:
2011
Vir:
Fakulteta za strojništvo (UM FS)
Izvirni znanstveni članek
Oznake:
Cp-Ti2 material;hydroxyapatite;plasma;characterization;
Thin hydroxyapatite coatings were produced on Cp-Titanium Grade-2 samples, with new high-voltage pulse-power equipment PJ-100 (Plasma Jet, Serbia) in order to get a more stable implant structure appropriate for further clinical applications. A comparative analysis of differently prepared surfaces of ...
Leto:
2015
Vir:
Fakulteta za strojništvo (UM FS)
Aleksandar Tošić,
Aleksandar Todorović,
Tanja Štular,
Nejc Radež,
Tadej Krivec,
Tjaž Brelih,
Neli Kovšca,
Anja Rudež,
Aleš Papič,
Vladan Jovičić,
Marko Palangetić
Objavljeni znanstveni prispevek na konferenci
Oznake:
PLC;inteligent object;
Personalization of intelligent objects
Leto:
2015
Vir:
Univerza na Primorskem (UP)