Iskalni niz:
išči po
išči po
išči po
išči po
Vrsta gradiva:
Jezik:
Št. zadetkov: 5
Recycling of steel chips
Matjaž Torkar, Martin Lamut, Agron Millaku
Strokovni članek
Oznake: steel chips;magnetic separation;cold compaction;remelting;
The recycling of waste metallic materials and the use of scrap are important for the economic production of a steelworks. Here, we investigate the technology of remelting steel chips. It was confirmed that the main problems with using chips in an electric arc furnace were the chips' large specific s ...
Leto: 2010 Vir: dLib.si Digitalna knjižnica Slovenije
An AES investigation of brushed AISI 304 stainless steel after corrosion testing
Matjaž Torkar, Djordje Mandrino, Martin Lamut
Strokovni članek
Oznake: stainless steel;pitting corrosion;passivation;deformation-induced martensite;AES analysis;
During a test in a wet salt (NaCl) chamber rusty spots and elongated pits appeared on the brushed surface of a prototype casing for a household device made from AISI 304 stainless steel. The corrosion pits only formed on the brushed surface and on the deformed edges. Metallography revealed deformati ...
Leto: 2008 Vir: dLib.si Digitalna knjižnica Slovenije
Physical properties of mineral fibers depending on the mineralogical composition
David Bombač, Martin Lamut, Primož Mrvar, Brane Širok, Benjamin Bizjan
Izvirni znanstveni članek
Oznake: mineral wool;fibers;chemical composition;mechanical properties;nanoindentation;
A developed methodology for determining the physical properties of mineral fibers prepared from different input mixtures under the same spinning wheel conditions is described and discussed. Energy dispersive X-ray fluorescence spectroscopy was combined with simultaneous thermal analysis and thermogr ...
Leto: 2021 Vir: Naravoslovnotehniška fakulteta (UL NTF)
Elastic and plastic deformation of surface asperities and their load-carrying mechanisms during the formation of a real contact area
Mitjan Kalin, Blaž Brodnik Žugelj, Martin Lamut, Karim Hamouda
Izvirni znanstveni članek
Oznake: in-situ asperity experiment;multi-asperity contacts;real contact area;work-hardening;deformation;steel;roughness;
How the contact behaviours of steel engineering surfaces with different roughnesses (R$_a$ = 0.1, 0.6 and 1.0 µm) are affected by the asperity work-hardening and the deformation regime are described here. Large values of the plasticity index Ψ between 20 and 50 indicate that all the surfaces should ...
Leto: 2023 Vir: Fakulteta za strojništvo (UL FS)
Zdravilna moč olja
Rajko Vidrih, Miran Kolarič, Barbara Mršol, Kamal Jouhari, Martin Pečarič, Vasilij Valenčič, Mojca Mavec, Daša Lamut
Radijska ali televizijska oddaja
Oznake: olja;rastlinska olja;prehranska vrednost;
Zdravilna moč olja
Leto: 2012 Vir: Biotehniška fakulteta (UL BF)
Št. zadetkov: 5
Ključne besede:
Leto izdaje:
Avtorji:
Repozitorij:
Tipologija:
Jezik: